Piezoelectric based vibration energy harvester with tip attraction magnetic force: modeling and simulation
نویسنده
چکیده
In recent times, vibration based energy harvesting has drawn attention of many researchers worldwide. This is due to advancement in Microelectromechanical (MEM) devices and wireless sensors with power requirements in range of microwatts-milliWatts; hence vibration energy sources have promising potentials for such demands. Thus, many attempts were made by researchers to develop different system configurations for effective utilization of vibrations that happen all around us. Cantilever beams with piezoelectric patches are used to harness kinetic energy from mechanical vibrations. This paper is aimed at studying the effect of adding a magnetic force at the tip mass, which is also a magnet with opposite pole, on power output of the energy harvester. The additional attraction force between the tip mass and the fixed magnet influences stiffness of the system, whilst tuning the natural frequency. Mathematical equation to depict the relationship between tuned natural frequency and distance between permanent magnet is derived. The lumped parameter model for the harvester with single fixed magnets aligned with magnetic tip mass is derived. MATLAB software is used to perform the simulation study on influence of the magnet on the harvester. Keywords— Piezoelectric; Magnet; Vibration energy harvester
منابع مشابه
An Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...
متن کاملA broadband bistable piezoelectric cantilever-based vibration energy harvester with nonlinear high power extraction
This work presents a nonlinear vibration energy harvester, which combines a nonlinear bistable broadband piezoelectric cantilever used to transduce ambient vibration energy, with synchronized capture for efficient harvesting over broadband sources. An accurate model of the bistable transducer, that augments the Butterworth van Dyke piezoelectric model to capture the external magnetic force adde...
متن کاملResonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester
The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...
متن کاملShape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester
The most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy. Using piezoelectric cantilevers is the most common method for vibration energy harvesting. Changing the shape of the cantilevers can lead to changing the generated output voltage and power. In this work vibration energy harvesting via piezoelectri...
متن کاملDynamic modeling and nonlinear vibration simulation of piezoelectric micro-beam in self sensing mode of atomic force microscope
Nowadays, atomic force microscope is considered as a useful tool in the determination of intermolecular forces and surface topography with the resolution of nanometers. In this kind of microscope, micro cantilever is considered as the heart of the microscope and is used as a measuring tool. This paper is aimed towards investigating the behavior of a piezoelectric micro cantilever with a triang...
متن کامل