Brushless Doubly-Fed Induction Machine as a Variable Frequency Transformer
نویسندگان
چکیده
VFT (variable frequency transformer) has been recently used as an alternative to HVDC (high voltage direct current) to control power flow between asynchronous networks. VFT consumes less reactive power than a back-to-back HVDC system, provides faster initial transient recovery, and has better natural damping capability. VFT is simply a DFIM (doubly-fed induction machine) where the machine torque controls the power flow from stator to rotor and vice versa. The main disadvantage of this VFT is the slip rings and brushes required for the rotor circuit, especially in bulk power transmission. The BDFM (brushless doubly-fed machine) with nested cage rotor machine is proved to be a comparable alternative to conventional DFIM in many applications with the advantage that all windings being in the stator frame with fixed output terminals. In this paper, the BDFM is used as a BVFT (brushless variable frequency transformer). A prototype machine is designed and simulated to verify the system validity.
منابع مشابه
Brushless Wound-Rotor [Synchronous] Doubly-Fed Electric Machine By Real-time Control
Experts theorized that a Brushless Wound-rotor [Synchronous] Doubly-fed Electric Machine System (BWRSDF), which can symmetrically motor or generate with variable speed, provides higher efficiency, higher power density, higher torque density, and lower cost than any other electric machine system, including the permanent magnet electric machine system, but only with the discovery of a practical b...
متن کاملPerformance Description of Brushless Doubly-Fed Induction Machine in Its Asynchronous and Variable Speed Synchronous Modes
Brushless Doubly-Fed Machine has attracted considerable attention in recent years due to its advantages. It has the robustness of the squirrel cage induction machine, and the speed and power factor controllability of the synchronous machine as well as the absence of brushes and slip rings, and using a fractionally rated frequency converter. Hence, there are considerable benefits over the conven...
متن کاملEquivalent circuit for the brushless doubly fed machine (BDFM) including parameter estimation and experimental verification
Experimental results from a frame size 180 brushless doubly fed (induction) machine (BDFM) fitted with four rotor designs are presented. The machine is intended for use as a variable speed generator, or drive. A per phase equivalent circuit for the machine has been developed and a method of obtaining parameters for the circuit is described. Expressions for the torque as a function of speed have...
متن کاملNeuro-fuzzy Sliding Mode Controller Based on a Brushless Doubly Fed Induction Generator
The combination of neural networks and fuzzy controllers is considered as the most efficient approach for different functions approximation, and indicates their ability to control nonlinear dynamical systems. This paper presents a hybrid control strategy called Neuro-Fuzzy Sliding Mode Control (NFSMC) based on the Brushless Doubly fed Induction Generator (BDFIG). This replaces the sliding surfa...
متن کاملAdaptive Fuzzy Control of a Variable Speed Power Generating System with Doubly Excited Reluctance Machine
Fuzzy control methods are developed for a high efficient variable speed constant frequency power generating system, with wind power generation as an example. In slip power recovery configuration, the system is composed of a doubly excited brushless reluctance machine and a reduced rating power electronic converter unit linking the stator secondary circuit with the power line. The doubly excited...
متن کامل