Production of carbon-coated aluminium nanopowders in pulsed microarc discharge
نویسندگان
چکیده
A new technique of metal nanopowder production and in situ coating using a microarc discharge is proposed. The feasibility of this method is demonstrated and preliminary results are presented. The microarc discharge was operated at 1 atm in both pure Ar and natural gas environments. Respectively, aluminium nanoparticles without and with ∼1 nm thick carbon surface coating were obtained. The morphology and structures of the nanoparticles were studied using a transmission electron microscope (TEM), and size distribution of the coated particles was determined from the TEM image analyses. It was found that the sizes of the produced carbon-coated aluminium particles were well described by a lognormal distribution with the geometrical mean size of 22.7 nm and standard deviation of 1.35.
منابع مشابه
Enhanced wettability and electrolyte uptake of coated commercial polypropylene separators with inorganic nanopowders for application in lithium-ion battery
In this research, inorganic material type and content influence on coating of commercially available polypropylene (PP) separator were studied for improving its performance and safety as lithium ion battery separator. Heat-resistant nanopowders of Al2O3, SiO2 and ZrO2 were coated using polyvinylidene fluoride (PVDF) binder. Coating effects on the separators morphology, wettability, high tempera...
متن کاملNanopowders produced by electrical explosion of wires
Electrical explosion of wires (EEW) is a method for production of nanopowders. Depending on type of chemical composition of working ambient in the discharge chamber nanopowders of carbides can be produced (EEW in hydrocarbons) or nanopowders of oxides (EEW in oxygen contained medium). Phase compositions of nanopowders prepared by electrical explosion of tungsten and aluminium wires in liquid an...
متن کاملPulsed electrodeposition into AAO templates for CVD growth of carbon nanotube arrays
Anodic aluminium oxide (AAO) templates for multi-walled carbon nanotube (MWCNT) growth were produced by anodization of aluminium followed by pulse-reverse electrodeposition of cobalt inside the AAO pores. Cobalt functioned as the catalyst for H2/C2H2 chemical vapour deposition (CVD) growth of fairly well graphitized MWCNTs initiating inside the majority of the AAO pores and quickly growing beyo...
متن کاملOzone Generation by Pulsed Streamer Discharge in Air
Ozone is well established as an important oxidising agent in many industrial applications and the high-voltage pulsed streamer discharge technique has emerged as an efficient method for its production. The paper investigates the parameters that are important in this process, including the magnitude of the applied pulse voltage, the air flow rate and the electrode dimensions and spacing, when us...
متن کاملOne-pot synthesis of manganese oxide-carbon composite microspheres with three dimensional channels for Li-ion batteries
The fabrication of manganese oxide-carbon composite microspheres with open nanochannels and their electrochemical performance as anode materials for lithium ion batteries are investigated. Amorphous-like Mn3O4 nanoparticles embedded in a carbon matrix with three-dimensional channels are fabricated by one-pot spray pyrolysis. The electrochemical properties of the Mn3O4 nanopowders are also compa...
متن کامل