Design of a Fuzzy Gain Scheduling Controller Having Input Saturation: a Comparative Study
نویسندگان
چکیده
A fuzzy gain scheduling proportional controllers that exhibits the improved performance than the conventional linear fixed gain controller having input saturation is proposed in this paper. We proposed an adaptive anti-windup control system in which the gain of a proportional controller is dynamically tuned by a fuzzy PD system. The methodology employed in the analysis is based on the describing function (DF), which is determined the range of the universal discourse for the output of the fuzzy PD system. Other approaches are the linear quadratic regulator (LQR) method and combined back-calculation and generalized conditioning anti-windup. In this paper, a comparison study of these three approaches for design anti-windup controller is made. The simulation results show the differences and confirm the availability of the proposed design approaches.
منابع مشابه
Design On-Line Tunable Gain Artificial Nonlinear Controller
One of the most important challenges in nonlinear, multi-input multi-output (MIMO) and time variant systems (e.g., robot manipulator) is designing a controller with acceptable performance. This paper focused on design a new artificial non linear controller with on line tunable gain applied in the robot manipulator. The sliding mode fuzzy controller (SMFC) was designed as 7 rules Mamdani’s infer...
متن کاملDesign On-Line Tunable Gain Artificial Nonlinear Controller
One of the most important challenges in nonlinear, multi-input multi-output (MIMO) and time variant systems (e.g., robot manipulator) is designing a controller with acceptable performance. This paper focused on design a new artificial non linear controller with on line tunable gain applied in the robot manipulator. The sliding mode fuzzy controller (SMFC) was designed as 7 rules Mamdani’s infer...
متن کاملFuzzy gain scheduling of PID controller for stiction compensation in pneumatic control valve
Inherent nonlinearities like, deadband, stiction and hysteresis in control valves degenerate plant performance. Valve stiction standouts as a more widely recognized reason for poor execution in control loops. Measurement of valve stiction is essential to maintain scheduling. For industrial scenarios, loss of execution due to nonlinearity in control valves is an imperative issue that should be t...
متن کاملGain-scheduling control of T-S fuzzy systems with actuator saturation
This paper presents a gain-scheduling output feedback control design method for T-S fuzzy systems with actuator saturation. Different from existing control design methods for T-S fuzzy systems, the basic idea of the proposed approach is to transform the T-S fuzzy model with saturation nonlinearity into the form of linear fractional transformation (LFT). Instead of commonly used fuzzy controller...
متن کاملGain Scheduling Waste-gate Control of Turbocharger Using MATLAB & GT-POWER
Turbochargers are used to increase engine manifold air pressure. Control of intake manifold pressure is crucial issue which is done through the speed control of turbocharger, but since it is difficult to directly control the speed of the turbocharger, it is done indirectly through a gate that called the waste gate, which is located in the engine outlet and turbocharger’s turbine inlet. One of t...
متن کامل