An analog decoder for concatenated magnetic recording schemes

نویسندگان

  • Alexandre Graell i Amat
  • Guido Montorsi
  • Andrea Neviani
  • Andrea Xotta
چکیده

This paper presents an all-analog iterative decoding network for an EPR4 magnetic recording system. A powerful serially concatenated architecture is considered, consisting of a simple outer code, an interleaver with reasonable size and a rate 1 EPR4 channel as inner code. The analog chip design is based on analog 0.18μm CMOS technology. Simulation results for both digital and analog implementations are shown. Practical implementation issues such as considerations of mismatch effects over performance are also discussed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Combined Modulation and Error Correction Decoder Using Generalized Belief Propagation

Constrained codes also known as modulation codes are a key component in the digital magnetic recording systems. The constrained codes forbids particular input data patterns which lead to some of the dominant error events or higher media noise. In data recording systems, a concatenated approach toward the constrained code and error-correcting code (ECC) is typically used and the decoding is done...

متن کامل

Detection and Decoding for 2D Magnetic Recording Channels with 2D Intersymbol Interference

This paper considers iterative detection and decoding on the concatenated communication channel consisting of a two-dimensional magnetic recording (TDMR) channel modeled by the four-grain rectangular discrete grain model (DGM) proposed by Kavcic et. al., followed by a two-dimensional intersymbol interference (2D-ISI) channel modeled by linear convolution of the DGM model’s output with a finite-...

متن کامل

PROPOSAL TITLE OF PROPOSAL : Concatenated Coding Schemes for Bit

The proposed research program addresses a key signal processing issue for BPMR, i.e., the correction of written-in errors introduced by the BPMR channel. To this end, we will investigate concatenated coding schemes for an insertiondeletion-substitution (IDS) channel that models the residual write errors that the channel decoder sees after the detection phase in a BPMR system. Our concatenated c...

متن کامل

All-Analog Decoder for a Binary (18,9,5) Tail-Biting Trellis Code

An all-analog high-speed decoding technique is described which is suitable for magnetic recording (MR) and other computationally demanding applications. A decoder for a binary (18,9,5) tail-biting trellis code, which is much simpler than the codes used for MR, has been chosen to demonstrate this technique. It achieves a decoding rate of 100 Mbit/s at a single 5V power supply. The power consumpt...

متن کامل

A Tensor-Product Parity Code for Magnetic Recording

In magnetic recording channels, a standard code architecture consists of an outer Reed-Solomon code in concatenation with an inner parity code. The inner parity code is used to detect and correct commonly occurring error events. Generally, a parity code with short block length performs better, as multiple error events within one block and, consequently, miscorrection are less likely. In this pa...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002