207/1 Nonlinear Modeling with Hydrodynamics and Flow Control Using Inverse Pouring Dynamics of Tilting-Ladle-Type Automatic Pouring Process
نویسندگان
چکیده
This paper is concerned with the pouring control of tilting-ladle-type automatic pouring systems in casting industries. A new approach to the modeling and control system of the pouring process is proposed. In the approach, the flow rate model is described by a nonlinear system with hydrodynamics. The flow rate control system is built by a feedfoward control using the inverse dynamics of the flow rate model. In this control system, control parameters are obtained from the shape of the ladle. Therefore, the present approach does not reqpuire many experiments to obtain the control parameters. In addition, this system enables application for ladle with a complex shape. The proposed method is applied to a tilting-type automatic pouring system with a cylindrical ladle, and the effectiveness of the present system is then demonstrated through experiments.
منابع مشابه
A Novel Flow Rate Estimation Method Using Extended Kalman Filter and Sensor Dynamics Compensation with Automatic Casting Pouring Process
We describe here a method for estimating the pouring flow rate for tilting-ladle-type automatic pouring systems used in casting industries. To precisely pour molten metal into the mold, controlling the flow rate of liquid flowing out of the ladle is mandatory. However, it is difficult to directly measure the pouring flow rate by using a conventional flow meter, because the flow meter is damaged...
متن کاملControl of Self-transfer-type Automatic Pouring Robot with Cylindrical Ladle
This paper is concerned with advanced control of self-transfer-type automatic pouring robot, with focus on the pouring control to cylindrical ladle and sloshing suppression (liquid vibration) control to the liquid in a ladle. In the pouring control, the flow rate model of cylindrical ladle is represented by LPV(Linear Parameter Varying) model, and FeedForward(FF) controller is then designed by ...
متن کاملModeling and Identification of Pouring Flow Process With Tilting-Type Ladle for an Innovative Press Casting Method Using Greensand Mold
Recently, a new method of a press casting using greensand mold was proposed by our group as a means of ferrous casting. This method has advantages in terms of energy savings and cost because a sprue cup and runner channel are not needed. Still, it is important to pour accurately and quickly in this method. Therefore, a feedforward outflow control is presented by using a mathematical model and i...
متن کاملSloshing Control in Tilting Phases of the Pouring Process
We propose a control design scheme that aims to prevent undesirable liquid outpouring and suppress sloshing during the forward and backward tilting phases of the pouring process, for the case of liquid containers carried by manipulators. The proposed scheme combines a partial inverse dynamics controller with a PID controller, tuned with the use of a “metaheuristic” search algorithm. The “metahe...
متن کاملOn the Controller Design for the Outpouring Phase of the Pouring Process
The performance of a two stage control design scheme on the control of liquid outpouring and the suppression of liquid sloshing during the outpouring phase of the pouring process is studied for the case of liquid containers carried by manipulators. The designed scheme, that does not require measurements of the liquid’s motion within the tank, combines a partial inverse dynamics controller with ...
متن کامل