Holographic directive reflectors for reflective color LCDs
نویسندگان
چکیده
RGB directive color reflectors were implemented for bright reflective color LCDs. The reflection gain at a white display state was suggested to be 3.5 times as large as the white standard. The color gamut was found to be as wide as the NTSC standard. There observed little color shifts within the directive angle.
منابع مشابه
Measurement of reflective liquid crystal displays
Cell gap thickness is one of the most important design parameters for liquid crystal displays ~LCD!. Existing measurement methods only apply to transmittive LC cells. These methods are obviously unsuitable for measuring the cell gaps of reflective LCDs with internal reflectors. This kind of LCD includes single polarizer reflective displays and liquid crystal on silicon displays. The objective o...
متن کاملChromatic parameter space representation of LCD operating modes
A chromatic parameter space (CPS) representation is proposed to represent the operation of LCDs. Both chrominance and luminance are visualized in the CPS diagrams. All the usual display modes, both transmissive and reflective, such as TN, ECB, OMI, STN, and SBE are shown clearly on the diagrams. Two designs with the help of CPS are proposed and demonstrated: multicolor STN and a novel fully-com...
متن کاملEffective gray scale in lithographically scribed planar holographic Bragg reflectors.
We demonstrate that holographic Bragg reflector grating structures, which are photolithographically scribed in planar waveguides, support a unique approach to apodization and overlay that uses fixed-depth etching and partial contour writing to achieve continuous reflective amplitude control.
متن کاملP-83: A New Reflective Twisted Nematic Liquid Crystal Display Mode with Large Cell Gap for Direct View Applications
We propose a new reflective twisted nematic display mode, which is called the second minimum RTN mode. This mode has a larger d∆n value compared with the first minimum RTN mode which we proposed previously. A cell gap of 7μm or larger can be used for this mode which makes the fabrication processing of this kind of reflective LCDs easier and more compatible with that of TN LCDs. The color disper...
متن کاملBasic Holographic Characteristics of a Panchromatic Light Sensitive Material for Reflective Autostereoscopic 3D Display
Basic holographic characteristics of a newly developed panchromatic ultrafine grain silver halide light sensitive material for RGB recording of reflective holographic screen for autostereoscopic 3D display are presented. The average grain size is less than 10 nm which ensures high resolution, diffraction efficiency, and signal-to-noise ratio (more than 100 : 1) in a large dynamic range for RGB ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000