Optimization of Uv Laser Scribing Process for Led Sapphire Wafers
نویسندگان
چکیده
Billions of LEDs are used today in traffic control, automotive headlights, flat panel display technology, mobile devices, back lighting, projection and general illumination applications. With the dramatic growth in LEDs, manufacturers are looking for technologies to increase production yield and decrease cost. Sapphire wafer singulation into miniature dies is one of the critical steps used in blue/green LED manufacturing. Typical dicing techniques used in wafer singulation process include laser dicing, laser scribing and breaking, mechanical scribing and breaking, and diamond blade sawing. In recent years, laser scribing and breaking has proven to be very efficient for volume LED manufacturing. In this paper we have characterized the effect of 355nm Qswitched DPSS laser parameters such as fluence, pulse width and repetition rate on laser scribing process by measuring sapphire wafer cutting depth and scribe kerf width. Furthermore we have also explored the techniques to increase process efficiency while maintaining quality of scribes using different laser sources.
منابع مشابه
Optimization of UV laser scribing process for light emitting diode sapphire wafers
Billions of light emitting diodes LEDs are used today in traffic control, automotive headlights, flat panel display technology, mobile devices, back lighting, projection, and general illumination applications. With the dramatic growth in LEDs, manufacturers are looking for technologies to increase production yield and decrease cost. Sapphire wafer singulation into miniature dies is one of the c...
متن کاملRemoval Mechanism and Defect Characterization for Glass-Side Laser Scribing of CdTe/CdS Multilayer in Solar Cells
Laser scribing is an important manufacturing process used to reduce photocurrent and resistance losses and increase solar cell efficiency through the formation of serial interconnections in large-area solar cells. High-quality scribing is crucial since the main impediment to large-scale adoption of solar power is its high production cost (price-per-watt) compared to competing energy sources suc...
متن کاملFabrication of Graphene/MoS2 Nanocomposite for Flexible Energy Storage
In the present work,MoS2 decorated graphene nanocomposite powders were synthesized by laser scribing method.Theobtainedflexible light-scribed graphene/MoS2composites are very suitableas micro-supercapacitors and thus their performance was evaluated at different concentrations.The effect of laser scribing process to reducegraphene oxide (GO) was investigated. The GO/MoS2composite wassynthesized ...
متن کاملInGaN-BASED LASER DIODES
UV InGaN and GaN single-quantum well structure light-emitting diodes (LEDs) were grown on epitaxially laterally overgrown GaN (ELOG) and sapphire substrates. When the emission wavelength of UV InGaN LEDs was shorter than 380 nm, the external quantum efficiency (EQE) of the LED on ELOG was much higher than that on sapphire, but only for highcurrent operation. At low-current operation, both LEDs ...
متن کاملHighest-speed dicing of thin silicon wafers with nanosecond-pulse 355nm q-switched laser source using line-focus fluence optimization technique
Due to current and future anticipated widespread use of thin silicon wafers in the microelectronics industry, there is a large and growing interest in laser-based wafer dicing solutions. As the wafers become thinner, the laser advantage over saw dicing increases in terms of both the speed and yield of the process. Furthermore, managing the laser heat input during the dicing process becomes more...
متن کامل