Design of Pressure Relief Valves for Protection of Steel-Lined Pressure Shafts and Tunnels Against Buckling During Emptying
نویسندگان
چکیده
Using high-strength steels for pressure shafts and tunnel liners and taking into account significant rock mass participation allows the design of comparatively thin steel liners in hydropower projects. Nevertheless, during emptying of waterways, these steel linings may be endangered by buckling. Compared with traditional measures such as increased steel liner thickness and stiffeners, pressure relief valves are a very economical solution for protection of steel liners against critical external pressure and therefore buckling during emptying. A calculation procedure has been developed for the design of the required number and arrangement of pressure relief valves, and this has been used successfully in practice. Systematic model tests enabled the assumptions of the design method to be verified.
منابع مشابه
Steel-lined Pressure Tunnels and Shafts in Anisotropic Rock
For the design of steel-lined pressure tunnels and shafts in anisotropic rock, it is common practice to assume for the computation that the system stands in isotropic medium with the lowest stiffness measured in situ. In this paper, stresses and displacements in the steel liner of a particular steel-lined pressure tunnel are numerically assessed taking into account the anisotropic behavior of t...
متن کاملDetection of Local Wall Stiffness Drop in Steel-Lined Pressure Tunnels and Shafts of Hydroelectric Power Plants Using Steep Pressure Wave Excitation and Wavelet Decomposition
A new monitoring approach for detecting, locating, and quantifying structurally weak reaches of steel-lined pressure tunnels and shafts is presented. These reaches arise from local deterioration of the backfill concrete and the rock mass surrounding the liner. The change of wave speed generated by the weakening of the radial-liner supports creates reflection boundaries for the incident pressure...
متن کاملParametric Study of Steel-Lined Pressure Shafts in Anisotropic Rock
Steel-lined pressure tunnels and shafts are used to convey water from the reservoir to the turbines in high-head hydroelectric power plants. An axisymmetrical multilayer model is often considered by engineers for the design of the steel liner. Stresses and deformations can then be computed with a closed-form analytical solution in isotropic rock. When the rock is anisotropic, the lowest elastic...
متن کاملField Study and Evaluation of Buckling Behavior of Cylindrical Steel Tanks with Geometric Imperfections under Uniform External Pressure
Construction and assembling process of shell structures has caused main problems. In these structures, there is no possibility for the integrated construction due to their large shell extent and they are built using a number of welded curved panel parts; hence, some geometrical imperfections emerge. Most of these imperfections are caused by the process of welding, transportation, inappropriate ...
متن کاملBuckling Behavior of Semi-scale Steel Tank with Carbon Fiber Reinforced Polymer Ring Subjected to Lateral Uniform Pressure Loading
Research on increasing the buckling strength of tanks carrying fluid and also cylindrical shells of thin-walled steel in civil engineering and mechanics is important. This is due to the widespread use of these structures in the industry. Due to the low thickness of the body and also due to the pressure forces entering these tanks, these structures are exposed to lateral buckling. In this resear...
متن کامل