Stacked 3D RRAM Array with Graphene/CNT as Edge Electrodes

نویسندگان

  • Yue Bai
  • Huaqiang Wu
  • Kun Wang
  • Riga Wu
  • Lin Song
  • Tianyi Li
  • Jiangtao Wang
  • Zhiping Yu
  • He Qian
چکیده

There are two critical challenges which determine the array density of 3D RRAM: 1) the scaling limit in both horizontal and vertical directions; 2) the integration of selector devices in 3D structure. In this work, we present a novel 3D RRAM structure using low-dimensional materials, including 2D graphene and 1D carbon nanotube (CNT), as the edge electrodes. A two-layer 3D RRAM with monolayer graphene as edge electrode is demonstrated. The electrical results reveal that the RRAM devices could switch normally with this very thin edge electrode at nanometer scale. Meanwhile, benefited from the asymmetric carrier transport induced by Schottky barrier at metal/CNT and oxide/CNT interfaces, a selector built-in 3D RRAM structure using CNT as edge electrode is successfully fabricated and characterized. Furthermore, the discussion of high array density potential is presented.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Stacked graphene nanofibers for electrochemical oxidation of DNA bases.

In this article, we show that stacked graphene nanofibers (SGNFs) demonstrate superior electrochemical performance for oxidation of DNA bases over carbon nanotubes (CNTs). This is due to an exceptionally high number of accessible graphene sheet edges on the surface of the nanofibers when compared to carbon nanotubes, as shown by transmission electron microscopy and Raman spectroscopy. The oxida...

متن کامل

Spin-polarized transport through a zigzag-edge graphene flake embedded between two armchair nanoribbons electrodes

We study the coherent spin-polarized transport through a zigzag-edge graphene flake (ZGF), using Hubbard model in the nearest neighbor approximation within the framework of the Green function’s technique and Landauer formalism. The system considered consists of electrode/ (ZGF)/electrode, in which the electrodes are chosen to be armchair nanoribbons. The study was performed for two types of ele...

متن کامل

Hydrogen etching and cutting of multiwall carbon nanotubes

The interaction of H atoms with the curved concentric graphene walls of a multiwall carbon nanotube and the stacked planar graphene sheets of graphite was investigated using a combination of high resolution transmission electron microscopy HRTEM in conjunction with electron energy-loss and Raman spectroscopies. Continuous cylindrical graphene walls of a nanotube are etched and amorphized by the...

متن کامل

Electrochemistry at the edge of a single graphene layer in a nanopore.

We study the electrochemistry of single layer graphene edges using a nanopore-based structure consisting of stacked graphene and Al(2)O(3) dielectric layers. Nanopores, with diameters ranging from 5 to 20 nm, are formed by an electron beam sculpting process on the stacked layers. This leads to a unique edge structure which, along with the atomically thin nature of the embedded graphene electrod...

متن کامل

Oxide resistive memory with functionalized graphene as built-in selector element.

DOI: 10.1002/adma.201400270 transfer was repeated several times (typically ∼3) in order to further improve the conductance of the electrodes, therefore forming a multilayer graphene (MLG) stack. An optical graph of the glass substrate with the MLG fi lm on top is displayed in Figure 1 b, showing high transparency. Subsequently, the MLG fi lm was patterned into bottom electrodes (BEs) with width...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 5  شماره 

صفحات  -

تاریخ انتشار 2015