Growth inhibition of cultured smooth muscle cells by corrosion products of 316 L stainless steel wire.

نویسندگان

  • C C Shih
  • C M Shih
  • Y L Chen
  • Y Y Su
  • J S Shih
  • C F Kwok
  • S J Lin
چکیده

The potential cytotoxicity on vascular smooth muscle cells of corrosion products from 316 L stainless steel, one of most popular biomaterials of intravascular stents, has not been highlighted. In this investigation, 316 L stainless steel wires were corroded in Dulbecco's modified eagle's medium with applied constant electrochemical breakdown voltage, and the supernatant and precipitates of corrosion products were prepared as culture media. The effects of different concentrations of corrosion products on the growth of rat aortic smooth muscle cells were conducted with the [3H]-thymidine uptake test and cell cycle sorter. Both the supernatant and precipitates of corrosion products were toxic to the primary culture of smooth muscle cells. The growth inhibition was correlated well with the increased nickel ions in the corrosion products when nickel concentration was above 11.7 ppm. The corrosion products also changed cell morphology and induced cell necrosis. The cell growth inhibition occurred at the G0/G1 to S transition phase. Similar to our recent study of nitinol stent wire, the present investigation also demonstrated the cytotoxicity of corrosion products of 316 L stainless steel stent wire on smooth muscle cells, which might affect the poststenting vascular response.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The cytotoxicity of corrosion products of nitinol stent wire on cultured smooth muscle cells.

Although nitinol is one of most popular materials of intravascular stents, there are still few confirmative biocompatibility data available, especially in vascular smooth muscle cells. In this report, the nitinol wires were corroded in Dulbecco's modified Eagle's medium with constant electrochemical breakdown voltage and the supernatant and precipitates of corrosion products were prepared as cu...

متن کامل

Electrochemical and Theoretical Studies of Adsorption of 1-H-benzotriazole at Stainless Steel in Hydrochloric acid Solution Interface as Corrosion Inhibitors

The influence of the concentration of1-H-benzoteriazolon the corrosion of 316 stainless steel (SS) in chloride acid 1M solutions was studied. The potentiodynamics polarization and scanning electron microscopy (SEM) have been used. The inhibition efficiency increased with an increase in the concentration of1-H-benzoteriazol.The adsorption of1-H-benzoteriazol onto the SS surface occurs accord...

متن کامل

Corrosion Behaviour of Nickel Coated AISI 316 Stainless Steel as a Function of Annealing Temperature

AISI 316 stainless steels were coated with 250 nm Ni film by electron beam deposition and post-annealed at different temperatures with a nitrogen flow of 600 cm3min-1 nitrogen. The prepared samples were corrosion tested in 1.0 M sulphuric acid solution using potentiodynamic technique. Crystallographic and morphological structure of the samples were analyzedanalysed by X-ray diffraction (XRD) an...

متن کامل

Study of the Corrosion Resistance of Type 304L and 316 Austenitic Stainless Steels in Acid Chloride Solution

The corrosion resistance of type 304L and 316 austenitic stainless steels in 2M H2SO4 at 0-1.5%NaCl concentrations was studied through potentiodynamic polarization technique and optical microscopy analysis. The corrosion rate, pitting potential, passivation potential and surface morphology of both steel where significantly altered by the Clion concentration, alloy composition and metallurgical ...

متن کامل

Nanotextured stainless steel for improved corrosion resistance and biological response in coronary stenting.

Nanosurface engineering of metallic substrates for improved cellular response is a persistent theme in biomaterials research. The need to improve the long term prognosis of commercially available stents has led us to adopt a 'polymer-free' approach which is cost effective and industrially scalable. In this study, 316L stainless steel substrates were surface modified by hydrothermal treatment in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of biomedical materials research

دوره 57 2  شماره 

صفحات  -

تاریخ انتشار 2001