Rotational Stiffness at Ridges of Timber Folded-plate Structures
نویسندگان
چکیده
Folded-plate structures provide an efficient design using thin laminated veneer lumber panels. Inspired by Japanese furniture joinery, the multiple tab-and-slot joint was developed for the multi-assembly of timber panels with non-parallel edges without adhesive or metal joints. Because the global analysis of our origami structures reveals that the rotational stiffness at ridges affects the global behaviour, we propose an experimental and numerical study of this linear interlocking connection. Its geometry is governed by three angles that orient the contact faces. Nine combinations of these angles were tested and the rotational slip was measured with two different bending set-ups: closing or opening the fold formed by two panels. The non-linear behaviour was conjointly reproduced numerically using the finite element method and continuum damage mechanics.
منابع مشابه
Tests to Determine the Joint Stiffness and Resisting Moment Capacity of Joints in Timber-Framed Houses
Wind and earthquake disasters in the world often cause billions of dollars of damage to buildings, most of which is to non-engineered buildings-especially homes. Wood-frame homes use connectors which exhibit partial rotational rigidity at the member ends, making analytical solutions difficult. This is due to the lack of information about the complex behavior of the connections used in this type...
متن کاملCurved Folded Plate Timber Structures
Current research at the laboratory for timber construction IBOIS at EPFL focuses on shell structures. Two main families are investigated: shells made of linear elements, as timber rib shells, and shells made of surface elements, typically folded plate structures. With regard to timber rib shells, bent linear timber elements are used to create the shape of a shell. With folded plate structures, ...
متن کاملORIGAMI – Folded Plate Structures, Architecture
This research proposes new methods to generate rapidly complex folded plate structures that can be built with cross laminated timber panels. Composition and dimensions of these panels as well as the possibility to mill them by Computer Numerically Controlled machines, show a great potential for surface structures. The aim of this research is to reveal this potential in the domain of folded plat...
متن کاملFree Vibration Analysis of Variable Stiffness Composite Laminates with Flat and Folded Shapes
In this article, free vibration analysis of variable stiffness composite laminate (VSCL) plates with flat and folded shapes is studied. In order to consider the concept of variable stiffness, in each layer of these composite laminated plates, the curvilinear fibers are used instead of straight fibers. The analysis is based on a semi-analytical finite strip method which follows classical laminat...
متن کاملFinite Element Prediction of the Behavior of Profiled Steel Sheet Dry Board Folded Plate Structures an Improved Model (RESEARCH NOTE)
This paper describes an alternative finite element model that would yield more accurate results in the prediction of the behavior of Profiled Steel Sheet Dry Board (PSSDB) folded plate structures, which can be considered as an improvement of an earlier proposed model. The PSSDB folded plate structures are being proposed as an alternative to traditional forms of roof construction.The PSSDB syste...
متن کامل