All Carbon Solar Cells
نویسندگان
چکیده
The different arrangements and combinations in which carbon can exist produce a wide variety of compounds that have unique physical, chemical and electrical properties. Some of these allotropes behave as conductors while others are classified as semiconducting. Our efforts focused on taking advantage of the carbon-based materials’ potential and optimally we employed them together to form an all carbon solar cell. This final report is divided into the three major directions our work focused on: sorting strategies of semiconducting single-walled carbon nanotubes for the active solar cell light absorbing materials, doping strategies of carbon-based electrodes, and finally the demonstration of carbon-based solar cells. Single-walled carbon nanotubes originally come as a mix of metallic and semiconducting tubes; we developed sorting strategies to specifically select the semiconducting tubes optimal as sensitizers in a solar cell junction. We also developed effective doping strategies of graphene and carbon nanotube based electrodes enabling high conductivity and transparency. All of these separate parts were integrated together in an all-carbon based solar cell.
منابع مشابه
Recent development of carbon nanotubes materials as counter electrode for dye-sensitized solar cells
Dye-sensitized solar cells present promising low-cost alternatives to the conventional Silicon (Si)-based solar cells. The counter electrode generally consists of Pt deposited onto FTO plate. Since Pt is rare and expensive metal, nanostructured carbonaceous materials have been widely investigated as a promising alternative to replace it. Carbon nanotubes have shown significant properties such...
متن کاملTowards solution processed all-carbon solar cells: a perspective
In this perspective, we describe a new type of photovoltaic all-carbon composites, in which single walled carbon nanotubes (SWCNTs) and fullerenes are directly co-assembled and processed in water using graphene oxide (GO) as a surfactant. Solar cells made with C 60 /SWCNTs/reduced GO as the active layer and an additional evaporated C 60 blocking layer yield a power conversion efficiency of 0.21...
متن کاملAll-Carbon Electrodes for Flexible Solar Cells
Transparent electrodes based on carbon nanomaterials have recently emerged as new alternatives to indium tin oxide (ITO) or noble metal in organic photovoltaics (OPVs) due to their attractive advantages, such as long-term stability, environmental friendliness, high conductivity, and low cost. However, it is still a challenge to apply all-carbon electrodes in OPVs. Here, we report our efforts to...
متن کاملFabrication of dye sensitized solar cells with a double layer photoanode
Dye sensitized solar cell was fabricated from a double layer photoanode. First, TiO2 nanoparticles were synthesized by hydrothermal method. These TiO2 NPs were deposited on FTO glasses by electrophoretic deposition method in applied voltage of 5 V and EPD time of 2.5-10 min. Then TiO2 hollow spheres (HSs) were synthesized by sacrificed template method with Carbon Spheres as template and TTIP ...
متن کاملApplication of carbon materials as counter electrodes of dye-sensitized solar cells
Hard carbon spherule (HCS) has been investigated as a counter electrode for dye-sensitized solar cells. The overall conversion efficiency of the cell reached 5.7%, which is comparable to 6.5% of the counter electrode of platinum-sputtered fluorine-doped tin oxide used in Grätzel-type solar cells under the same experimental condition. It is found that the photovoltaic performance was strongly af...
متن کامل