Effects of Coupling Agent on the Properties of Durian Skin Fibre Filled Polypropylene Composite
ثبت نشده
چکیده
Durian skin is a newly explores natural fibre potentially reinforced polyolefin for diverse applications. In this work, investigation on the effect of coupling agent, maleic anhydride polypropylene (MAPP) on the mechanical, morphological, and thermal properties of polypropylene (PP) reinforced with durian skin fibre (DSF) was conducted. The presence of 30 wt% DSF significantly reduced the tensile strength of PP-DSF composite. Interestingly, even though the same trend goes to PP-DSF with the presence of MAPP, the reduction is only about 4% relative to unreinforced PP and 18% higher than PP-DSF without MAPP (untreated composite or UTC). The used of MAPP in treated composite (TC) also increased the tensile modulus, flexural properties and degradation temperature. The enhanced mechanical properties are consistent with good interfacial interaction as evidenced under scanning electron microscopy. Keywords—Durian skin fiber, coupling agent, mechanical properties, thermogravimetry analysis.
منابع مشابه
Fiber reinforced plastic composites using recycled materials
This work investigates the feasibility of using recycled high density polyethylene (rHDPE), recycled polypropylene (rPP) and old newsprint fiber (ONP) to manufacture fiber reinforced composites. The boards were made through air-forming and hot press. The effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...
متن کاملInvestigation on mechanical properties of composite made of sawdust and high density polyethylene
In this research, the effect of wood species and particle size on mechanicalproperties of wood plastic composites (WPC) made of fir (Abies alba) and beech(Fagus orientalis L.) sawdust and high density polyethylene (HDPE) wereinvestigated. Wood plastic composite (WPC) were made with 30% HDPE in abatch process at 185˚C, at two particle sizes of 40 mesh and 80 mesh. Maleicanhydride polypropylene (...
متن کاملMicromechanical Parameters from Macromechanical Measurements on Glass Reinforced Polypropylene
In recent years many elegant techniques have been developed for the quantification of composite micromechanical parameters. Unfortunately most of these techniques have found little enthusiastic support in the industrial product development environment. We have developed an improved method for obtaining the micromechanical parameters, interfacial shear strength, fibre orientation factor, and fib...
متن کاملInfluence of Maleic Anhydride on the Flexural, Tensile and Impact Characteristics of Sawdust Flour Reinforced Polypropylene Composite
Interfacial strength between polymeric matrix and natural filler reinforcement has direct effects on the properties of wood plastic composites. There are some approaches to improve the interfacial adhesion between two phases in wood plastic composites. One of them is using coupling agents to improve the composite properties. In this study, the effect of maleic anhydride as a coupling agent on t...
متن کاملPolypropylene-based Wood-plastic Composites: Effect of Using a Coupling Agent Derived from a Renewable Resource
In this work, post-consumer polypropylene and wood flour from Pinus elliottii were used to produce wood plastic composites. The effect of polypropylene grafted with itaconic acid used as a coupling agent on mechanical properties, thermal stability and morphology of the composites was investigated and compared with the composite developed with polypropylene grafted with maleic anhydride, commonl...
متن کامل