Fabrication and Measurements of Surface-etched- Grating Distributed Bragg Reflector Laser By
نویسندگان
چکیده
منابع مشابه
Distributed Reflector Structure and Diffraction Grating Structure in the Solar Cell
Today, due to qualitative growth and scientific advances, energy, especially electricity is increasingly needed by human society. One of the almost endless and pure energy which have been paid attention over the years is the solar energy. Solar cells directly convert solar energy into electrical energy and are one of the main blocks of photovoltaic systems. Significant improvement has been made...
متن کاملUltra efficient silicon nitride grating coupler with bottom grating reflector.
We theoretically propose a silicon nitride (Si(3)N(4)) grating coupler (GC) with both ultrahigh efficiency and simplified fabrication processes. Instead of using a bottom distributed Bragg reflector (DBR) or metal reflector, a bottom Si grating reflector (GR) with comparable reflectivity is utilized to improve the coupling efficiency. The fully etched Si GR is designed based on an industrially ...
متن کاملHigh-Speed Concatenation of Frequency Ramps Using Sampled Grating Distributed Bragg Reflector Laser Diode Sources for OCT Resolution Enhancement
Wavelength tunable sampled grating distributed Bragg reflector (SG-DBR) lasers used for telecommunications applications have previously demonstrated the ability for linear frequency ramps covering the entire tuning range of the laser at 100 kHz repetition rates. An individual SG-DBR laser has a typical tuning range of 50 nm. The InGaAs/InP material system often used with SG-DBR lasers allows fo...
متن کاملRegenerated distributed Bragg reflector fiber lasers for high-temperature operation.
This Letter presents distributed Bragg reflector (DBR) fiber lasers for high-temperature operation at 750°C. Thermally regenerated fiber gratings were used as the feedback elements to construct an erbium-doped DBR fiber laser. The output power of the fiber laser can reach 1 mW at all operating temperatures. The output power fluctuation tested at 750°C was 1.06% over a period of 7 hours. The the...
متن کاملAsymmetric Twin-Waveguide 1.55- m Wavelength Laser with a Distributed Bragg Reflector
We demonstrate a single frequency, 1.55 m wavelength laser based on an asymmetric twin-waveguide structure using a single growth step and a simple fabrication process. The external Bragg grating is formed on the passive ridge waveguide, optically coupled to the twin-guide gain section using a low loss, tapered mode transformer. The grating is produced by near-field holographic printing using a ...
متن کامل