Quantitative Laser Diffraction Method for the Assessment of Protein Subvisible Particles
نویسندگان
چکیده
Laser diffraction (LD) has been recognized as a method for estimating particle size distribution. Here, a recently developed quantitative LD (qLD) system, which is an LD method with extensive deconvolution analysis, was employed for the quantitative assessment of protein particles sizes, especially aimed at the quantification of 0.2-10 μm diameter subvisible particles (SVPs). The qLD accurately estimated concentration distributions for silica beads with diameters ranging from 0.2 to 10 μm that have refractive indices similar to that of protein particles. The linearity of concentration for micrometer-diameter silica beads was confirmed in the presence of a fixed concentration of submicrometer diameter beads. Similarly, submicrometer-diameter silica beads could be quantified in the presence of micrometer-diameter beads. Subsequently, stir- and heat-stressed intravenous immunoglobulins were evaluated by using the qLD, in which the refractive index of protein particles that was determined experimentally was used in the deconvolution analysis. The results showed that the concentration distributions of protein particles in SVP size range differ for the two stresses. The number concentration of the protein particles estimated using the qLD agreed well with that obtained using flow microscopy. This work demonstrates that qLD can be used for quantitative estimation of protein aggregates in SVP size range.
منابع مشابه
Protein Particle Analysis - Critical Factors and New Standards
The presence of particles is a major issue during therapeutic protein formulation development. Both proteinaceous and non-proteinaceous particles need to be analyzed not only due to the requirements of the Pharmacopeias, but also to monitor the stability of the protein formulation. Increasing concerns about the immunogenic potential together with new developments in particle analysis make a com...
متن کاملSynthesis oF Fe-TiC Hard Coating From Ilmenite via Laser Cladding
The aim of this work was to synthesize TiC reinforced coating on carbon steel via reduction of ilmenite powder. A mixture of ilmenite and graphite was pre-placed on AISI 1020 steel surface. The effect of the addition of excess graphite amounts on the progress of synthesis of carbide particles was studied. The evolution of phases in different coatings was analysed via X-ray diffraction and scann...
متن کاملRisk Assessment of Occupational Exposure to Cement Respirable Particles and Crystalline Silica in a Cement Factory
Introduction: Cement factory workers exposure to airborne particles containing crystalline silica in Portland cement chemical compound can caused pulmonary diseases, including silicosis and lung cancer. The aim of this study was to assess the risk of occupational exposure to respirable cement dust and crystalline silica in a cement factory in Khorasan Razavi province. Methods: In this cross-se...
متن کاملDrug Nano-Particles Formation by Supercritical Rapid Expansion Method; Operational Condition Effects Investigation
Dissolution pressure and nozzle temperature effects on particle size and distribution were investigated for RESS (Rapid Expansion of Supercritical Solution) process. Supercritical CO2 was used as solvent and Ibuprofen was applied as the model component in all runs. The resulting Ibuprofen nano-particles (about 50 nm in optimized runs) were analyzed by SEM and laser diffraction pa...
متن کاملUsing Deep Convolutional Neural Networks to Circumvent Morphological Feature Specification when Classifying Subvisible Protein Aggregates from Micro-Flow Images
Flow-Imaging Microscopy (FIM) is commonly used in both academia and industry to characterize subvisible particles (those ≤ 25μm in size) in protein therapeutics. Pharmaceutical companies are required to record vast volumes of FIM data on protein therapeutic products, but are only mandated under US FDA regulations (i.e., USP 〈 788 〉 ) to control the number of particles exceeding 10 and 25μm in d...
متن کامل