Sensitivity Factor Based Optimal Location of SVC on Transmission Network
نویسنده
چکیده
In modern days power system are becoming highly unpredictable, so low voltages and blackout are becoming common scenario. The voltage limits are affected because the system is operated close to its stability limits. To improve the voltage profile new generating plants have to be developed, which are restricted due to economic an environmental limitations. To overcome these limitations and use the existing network to the maximum, FACTS devices are used. In this paper, SVC a FACTS device is used to improve the voltage profile of the network. To decide the location of the SVC, voltage sensitivity analysis method is used. FACTS devices are used to compensate both real and reactive power. To demonstrate this IEEE 14 bus and 39 bus are considered. The complete simulation is done using PSAT version 2.1.6 in Matlab 7.10.0 (R2010 a).
منابع مشابه
Optimal Current Meter Placement for Accurate Fault Location Purpose using Dynamic Time Warping
This paper presents a fault location technique for transmission lines with minimum current measurement. This algorithm investigates proper current ratios for fault location problem based on thevenin theory in faulty power networks and calculation of short circuit currents in each branch. These current ratios are extracted regarding lowest sensitivity on thevenin impedance variations of the netw...
متن کاملOptimal Placement and Sizing of TCSC & SVC for Improvement Power System Operation using Crow Search Algorithm
Abstract: The need for more efficient power systems has prompted the use of a new technologies includes Flexible AC transmission system (FACTS) devices. FACTS devices provides new opportunity for controlling the line power flow and minimizing losses while maintaining the bus voltages within a permissible limit. In this thesis a new method is proposed for optimal placement and sizing of Thyristo...
متن کاملOptimal Location of Static Var Compensator Device for Damping Oscillations
Problem statement: Static Var Compensators (SVC) devices are used to improve voltage and reactive power conditions in AC systems. An additional task of SVC is to increase transmission capacity as result of power oscillation damping. The effectiveness of this controller depends on its optimal location and proper signal selection in the power system network. A residue factor had been proposed to ...
متن کاملFACTS Devices Allocation Using a Novel Dedicated Improved PSO for Optimal Operation of Power System
Flexible AC Transmission Systems (FACTS) controllers with its ability to directly control the power flow can offer great opportunities in modern power system, allowing better and safer operation of transmission network. In this paper, in order to find type, size and location of FACTS devices in a power system a Dedicated Improved Particle Swarm Optimization (DIPSO) algorithm is developed for de...
متن کاملImproving Long Run Marginal Cost based Pricing along with Extended Benefit Factor method for Revenue Reconciliation of Transmission Network in Restructured Power System
Abstract : There are several methods to cover the costs of a transmission system and distribution networks. These methods are divided into either incremental or marginal approaches, which can be either long-term or short-term. The main difference between the incremental and marginal approach is how to calculate the cost of using the network. In the incremental approach, simulation and in the ma...
متن کامل