Design of a CPW-Fed Ultra Wide Band Antenna
نویسندگان
چکیده
A CPW-fed ultra-wideband antenna was designed. The antenna was etched on a single-layer copper-cladding substrate, of which the material was FR4 with relative permittivity of 4.4, and the magnitude was 40.0 mm × 50.0 mm × 1.6 mm. The parameters of the antenna are simulated and optimized with HFSS. This paper proposes a new trapezoidal CPW-fed UWB antenna that the bandwidth (return loss ≤ −10 dB) covers 2.7 9.3 GHz range, which means a relative bandwidth of 110% with good radiation patterns and gain. Simulated and measured results for return loss, radiation pattern and gain were presented. A good agreement has been obtained between the simulation and experiment and the proposed antenna meets the requirements of the ultra-wideband antenna.
منابع مشابه
An Improved CPW-Fed Printed UWB Antenna With Controllable Band-notched Functions
A newly designed printed slot antenna is presented that incorporates variable two band-notched functions for ultra-wideband (UWB) applications. The two band notches of this coplanar waveguide (CPW) fed antenna are achieved by an M-shaped slot (MSS) embedded in the radiating element and a C-shaped strip (CSS) close to ground plane, therefore two very narrow rejected properties in the wireless lo...
متن کاملDesign of A Compact CPW-FED UWB Antenna with WiMAX and WLAN Band-Notched Characteristic Evaluated in AHP Framework
In this article, we present a new design of a coplanar waveguide fed (CPW-fed) ultra-wideband (UWB) antenna with dual band-notched characteristics. Two notched frequency bands are achieved by using two inverted U-shaped stepped impedance resonators. The proposed antenna can operate from 2.82 to 11 GHz (118%), defined by VSWR< 2, except two notched bands around 3.5 GHz (WiMAX) and 5.5 GHz (WLAN)...
متن کاملCompact CPW-fed Circular Patch Antenna for UWB Applications
In this paper, a novel CPW-fed antenna is presented for UWB applications. The antenna mainly comprises of a simple circular patch and a modified ground plane. The inclusion of two novel symmetrical rectangular slots with inner area of 3×2.8 mm2 to the top corners of the antenna creates a new path for the current and consequently leads to the bandwidth enhancement. A rectangular stub is also ado...
متن کاملDesign and Simulation of CPW-FED Printed Antenna for Ultra Wide Band (UWB) and Wireless LAN (WLAN) Applications
In this paper ,design and simulation of CPW-fed printed antenna for ultra wide band (UWB) and WirelessLAN applications is proposed .The antenna is integrated with the CPW-fed. Return loss ,gain and directivity and current distribution for the different frequencies are explored, It is shown proposed antenna has good gain and directivity .In addition ,some studies of the proposed antenna geometri...
متن کاملCPW-Fed Circularly Polarized Slot ANTENNA with Elliptical-Shaped Patch for UWB Applications
A new design of coplanar waveguide (CPW)-fed antenna with circular polarization (CP) and excellent impedance matching is presented. In this design a pair of circular-shaped slits is applied to opposite corners of the slot for enhancing the impedance matching and realizes bandwidth of 134.43% across 2.98-15.20 GHz for VSWR≤2. Furthermore this structure exhibits axial ration bandwidth (ARBW) of 3...
متن کاملNew Low Cost Printed Antenna CPW-Fed for Global Positioning System, Personal Communication System and Worldwide Interoperability for Microwave Access Band Applications (TECHNICAL NOTE)
This paper presents a new design of a CPW-Fed multi bands planar antenna. This antenna can be integrated easily with passive and active elements. The proposed antenna is suitable to operate for GPS, PCS and WiMAX bands. Its entire area is 52.3x52.6mm2 and is employed on an FR-4 epoxy substrate and fed by a 50 Ohm coplanar line. The antenna parameters have been analyzed and optimized by using AD...
متن کامل