Investigation of the Optoelectronic Properties of Ti-doped Indium Tin Oxide Thin Film
نویسندگان
چکیده
: In this study, direct-current magnetron sputtering was used to fabricate Ti-doped indium tin oxide (ITO) thin films. The sputtering power during the 350-nm-thick thin-film production process was fixed at 100 W with substrate temperatures increasing from room temperature to 500 °C. The Ti-doped ITO thin films exhibited superior thin-film resistivity (1.5 × 10-⁴ Ω/cm), carrier concentration (4.1 × 1021 cm-³), carrier mobility (10 cm²/Vs), and mean visible-light transmittance (90%) at wavelengths of 400-800 nm at a deposition temperature of 400 °C. The superior carrier concentration of the Ti-doped ITO alloys (>1021 cm-³) with a high figure of merit (81.1 × 10-³ Ω-¹) demonstrate the pronounced contribution of Ti doping, indicating their high suitability for application in optoelectronic devices.
منابع مشابه
A Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates
The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...
متن کاملStructural Properties of Post Annealed ITO Thin Films at Different Temperatures
Indium tin oxide (ITO) thin films were deposited on glass substrates by RF sputtering using an ITO ceramic target (In2O3-SnO2, 90-10 wt. %). After deposition, samples were annealed at different temperatures in vacuum furnace. The post vacuum annealing effects on the structural, optical and electrical properties of ITO films were investigated. Polycrystalline...
متن کاملThe Effect of Annealing on Structural, Optical and Electrical Properties of Nanostructured Tin Doped Indium Oxide Thin Films
A low level tin doped indium oxide, ITO, (ca. 10 w % SnO2) thin films were prepared on glass substrate by electron beam technique. Deposited films with deposition rate of 0.1–0.25 nm s were annealed at different temperatures from 250 to 550 °C in air. The thin films were characterized using low and high angle X-ray diffraction and UV-visible spectroscopy. The lattice constant and the grain size...
متن کاملEnhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملThe Effects of SR Irradiation on Tin-Doped Indium Oxide Thin Film Prepared by RF Magnetron Sputtering
Tin-doped indium oxide (ITO) thin films have been widely used as transparent electrodes of flat panel displays and solar cells because of its low electrical resistivity and high transmittance to visible light. In order to improve the electrical and optical properties of ITO thin films, many attempts have been carried out by means of several methods, for example, highly dense plasma assisted ele...
متن کامل