Weibull Statistical Reliability Analysis of Mechanical and Magnetic Properties of FeCuNbxSiB Amorphous Fibers
نویسندگان
چکیده
Glass-coated Fe76.5−xCu1NbxSi13.5B9 (x = 0, 1, 2, 3, 3.5) fibers were successfully fabricated by a modified Taylor method. The fibers showed circular morphology and smooth surface with different diameters. The mechanical properties of the fibers were evaluated and the Weibull statistical analysis has been introduced to characterize the strength reliability of the fibers, with the modulus m of the amorphous fibers reaching above 20. The magnetic properties were also studied. Lower coercivity was found for the fibers with amorphous, nanocrystalline, and microcrystalline structures rather than that for the coarse crystalline ones. The glass-coated FeCuNbSiB amorphous fibers have excellent comprehensive performance compared with the other kind of fibers.
منابع مشابه
EFFECT OF CERAMIC FOAM FILTERS ON OXIDES REMOVAL AND THE TENSILE PROPERTIES OF A-356 ALLOY CASTINGS
This article examines the Weibull statistical analysis that was used for investigating the effect of melt filtration on tensile properties and defects formed inside the casting. Forming and entrapping of double oxide films have been explained by using the context of critical velocity of melt in the runner. SutCast software results were used to examine the amounts of the velocity of melt as...
متن کاملMechanical Properties of Irregular Fiber (Invited Review Paper)
Irregularities are inherent to virtually all fibers, including the conventional textile fibers, the high-performance brittle fibers and newly developed nano-fibers. These irregularities can fall into two main categories: dimensional or geometrical irregularity (external) and structural irregularity (internal). For natural fibers such as wool, diameter variation along fiber length is atypical ex...
متن کاملStatistical Analysis on the Mechanical Properties of Magnesium Alloys
Knowledge of statistical characteristics of mechanical properties is very important for the practical application of structural materials. Unfortunately, the scatter characteristics of magnesium alloys for mechanical performance remain poorly understood until now. In this study, the mechanical reliability of magnesium alloys is systematically estimated using Weibull statistical analysis. Intere...
متن کاملIntroducing and investigating structural and magnetic properties of ribbons Co68.5-xFe4WxSi16.5B11 (x = 0.8, 2) in amorphous and crystalline states
In this study, for the first time, cobalt base ribbons were made by adding two different amounts of tungsten with Co67.7Fe4W0.8Si16.5B11 and Co66.5Fe4W2 Si16.5B11 compounds by melt spinning in the water. The pattern of X-ray diffraction taken from these ribbons shows that these magnetic ribbons are amorphous. By using thermal analysis curves, taken from the ribbons, crystallization temperature...
متن کاملارزیابی ریزساختاری و خواص مغناطیسی آلیاژ آمورف پایه کبالت Co70B20Si5Fe4Mo1 تولید شده بهروش مذابریسی و آلیاژسازی مکانیکی
Cobalt-based amorphous alloys attracted the attention of many researchers to carry out fundamental research for their application in electronics, sensors and magnetic memory due to their special magnetic properties including close to zero Magnetostriction, magnetic permeability and high saturation magnetization. The purpose of this study is the formation and evaluation of microstruct...
متن کامل