Low-sensitivity SAB band-pass active-RC filter using impedance tapering
نویسندگان
چکیده
The design procedure of low-sensitivity second-and third-order class-4 Sallen and Key active resistance-capacitance (RC) allpole filters, using impedance tapering, has already been published. There a ladder structure in the positive feedback loop of an operational amplifier was used. In this paper desensitization using impedance tapering is applied to class-3 circuits with negative feedback referred to as a “single-amplifier biquad” (SAB). The RC-section in the negative feedback loop is impedance scaled upwards, from the driving source to the negative amplifier input. Second-order band-pass filters are considered. The improvement comes free of charge; component count and topology remain unchanged, whereas the component values, selected for impedance tapering, account for the significant decrease in sensitivity to component tolerances.
منابع مشابه
Impedance Tapering Effects on “Low-Q” SAB Band-Pass Active-RC Filter
The design procedure of low-sensitivity active resistance-capacitance (RC) allpole filters, using impedance tapering, has already been published. The low-sensitivity filter sections already described in publication are class 4 (TT-SABB) Sallen and Key sections. In this paper class 3 (SAB) sections for low pole-Q realization are considered. Impedance tapering is applied on Lsections, which are ...
متن کاملLow-sensitivity active-RC high- and band-pass second-order Sallen & Key allpole filters
The design procedure of low-sensitivity, low-pass (LP) 2-and 3-order class-4 Sallen and Key active resistance-capacitance (RC) allpole filters, using impedance tapering, has already been published [1]. In this paper desensitization using impedance tapering is applied to HP and BP 2-order filters. It is shown that HP filters have dual properties to LP filters in the sense of sensitivity. Among v...
متن کاملLow-Noise Active-RC Allpole Filters Using Optimized Biquads
In this paper it is shown that active-RC filters can be designed to have low-sensitivity to passive components and at the same time possess low output thermal noise. The design procedure of low-noise and low-sensitivity, positive-feedback, secondand third-order low-pass allpole filters, using impedance tapering, has already been published. The noise analysis in this paper was extended to the hi...
متن کاملLow Sensitivity, Low Power BP Active Filter Structures with Biquads using Impedance Tapering
This paper presents the realization of narrow high-order band-pass (BP) active resistance-capacitance (RC) filters. It was shown that such filters have large sensitivities to component tolerances, and if they were built using structures with multiple feedbacks, theirs sensitivities are substantially decreased. Furthermore, it was demonstrated that sensitivities of inner 2-order blocks (“biquads...
متن کاملLow-Noise, Low-Sensitivity Active-RC Allpole Filters Using MATLAB Optimization
The application of Matlab, combining its symbolic and numeric calculation capabilities, to calculate noise and sensitivity properties of allpole active-RC filters is shown. Transfer function coefficients calculations, as well as plotting of amplitude-frequency and phasefrequency characteristics (Bode plots) have been performed using Matlab. Thus, using Matlab a comparison of different design st...
متن کامل