Meandering Dipole Antenna for Passive Uhf Rfid Application
نویسندگان
چکیده
RFID is very challenging area in today’s world. The basic elements of RFID system are reader and tag. The main element of the RFID system is TAG antenna. Most of the UHF RFID tags have to be connected to very small objects so it is essential that the tag antenna should be miniaturized without degrading the radiation efficiency. There are various techniques to miniaturize antenna means reduce the size of antenna. But this work mainly focuses on meandering technique. In meandering technique it requires single or multiple folds of radiating body. Here the arms of the dipole are folded to reduce the size of antenna without affecting the radiation efficiency. The meandering dipole antenna is designed and simulated in IE3D software. KeywordsMeandering dipole, Passive UHF RFIDs.
منابع مشابه
Passive Rfid Antenna for Uhf and Uwb Application
The intent of this paper is to compare two designs of RFID antenna which is used for Ultra High frequency (UHF) and Ultra wideband (UWB) applications. Here the comparison of Hybrid design and XETS design is done. In hybrid design the antenna simultaneously operate on both the bands viz.UHF as well as UWB. In XETS design antenna operates only for UWB. Hybrid antenna is planar antenna. There is a...
متن کاملTriple-band Printed Dipole Tag Antenna for RFID Application
In this paper, a triple-band printed dipole tag antenna is proposed for RFID application. The tri-band printed dipole antenna is designed at 0.92 GHz, 2.45 GHz and 5.8 GHz using Computer Simulation Technology (CST). In order to achieve triple-band operation, the proposed antenna contains two branch elements, which acts as an additional resonator. The designed antenna was fabricated using Taconi...
متن کاملAnalysis of Low Profile UHF RFID Tag Antennas and Performance Evaluation in Presence of a Metallic Surface
Passive UHF RFID systems have drawn considerable attention because these can provide a long reading range, high data rate and small antenna size. However, a passive UHF RFID system has challenges in tagging a metallic object due to the effects of conducting materials on the tag antenna performance. This paper proposes two widely used label-type antennas: folded dipole antenna and meandered dipo...
متن کاملA High-Gain Passive UHF-RFID Tag with Increased Read Range
In this work, a passive ultra-high frequency radio-frequency identification UHF-RFID tag based on a 1.25 wavelengths thin dipole antenna is presented for the first time. The length of the antenna is properly chosen in order to maximize the tag read range, while maintaining a reasonable tag size and radiation pattern. The antenna is matched to the RFID chip by means of a very simple matching net...
متن کاملTriple - Band Printed Dipole Tag Antenna For
Abstract—In this paper, a triple-band printed dipole tag antenna is proposed for Radio Frequency Identification (RFID). The tripleband printed dipole antenna is designed to operate at 0.92GHz, 2.45GHz and 5.8 GHz using Computer Simulation Technology (CST) software. In order to achieve triple-band operation, the proposed antenna contains two branch elements, which act as an additional resonator....
متن کامل