Effect of a Measurement Based Error on the Capacity of a 5 x 5 Twisted – Pair MIMO Communications System
نویسندگان
چکیده
The MIMO Communications system model is presented with reference to actual transmission line measurements on a 5 x 5 twisted – pair telephone cable. It is thought that such a model could be useful in complementing a fibre optic backbone internet system since twisted – pair connections to consumer premises are more economically viable then fibre optic ones. This paper shows that a successful implementation of a MIMO communications system for twisted – pair telephone cable is contingent on accurate measurement of the S -parameter, 21 S , of the telephone cable.
منابع مشابه
A Variable Structure Observer Based Control Design for a Class of Large scale MIMO Nonlinear Systems
This paper fully discusses how to design an observer based decentralized fuzzy adaptive controller for a class of large scale multivariable non-canonical nonlinear systems with unknown functions of subsystems’ states. On-line tuning mechanisms to adjust both the parameters of the direct adaptive controller and observer that guarantee the ultimately boundedness of both the tracking error and tha...
متن کاملThe Effect of 3D Antenna Radiation Pattern on Narrowband MIMO Capacity : Simulation and Measurement
G. J. Foschini and M. J. Gan have been shown that the use of multiple antennas in both transmitter and receiver, called multiple input multiple output system (MIMO), linearly increases the channel capacity with the number of antennas [1]. The channel model in [2] is based on the angle of arrival (AOA). This model, however, does allow including the radiation pattern into the capacity calculation...
متن کاملPower Allocation Strategies for MIMO Radar Waveform Design
The role of waveform design is central to effective radar resource management for state-of-the art radar systems. The waveform shape employed by any radar system has always been a key factor in determining the performance and application. The design of radar waveform to minimize mean square error (MSE) in estimating the target impulse response is based on power allocation using waterfilling. ...
متن کاملar X iv : 0 70 5 . 19 14 v 1 [ m at h . FA ] 1 4 M ay 2 00 7 Measurement of time – varying Multiple – Input Multiple – Output Channels
We derive a criterion on the measurability / identifiability of Multiple–Input Multiple–Output (MIMO) channels based on the size of the so-called spreading support of its subchannels. Novel MIMO transmission techniques provide high-capacity communication channels in time-varying environments and exact knowledge of the transmission channel operator is of key importance when trying to transmit in...
متن کاملEvaluating the deformation monitoring capability of a ground based SAR system with MIMO antenna
By increasing the applicability of ground-based SAR (GBSAR) systems in geoscience and remote sensing, the development and evaluation of new systems have gained attention. GBSAR systems can be utilized for monitoring areas that are hard to or cannot be seen by the airborne or spaceborne systems. Furthermore, they have better spatial and temporal resolutions and are cost-effective and easy to imp...
متن کامل