Holographic recording in acrylamide photopolymers: thickness limitations.

Holographic recording in thick photopolymer layers is important for application in holographic data storage, volume holographic filters, and correlators. Here, we studied the characteristics of acrylamide-based photopolymer layers ranging in thickness from 250 microm to 1 mm. For each thickness, samples with three different values of absorbance were studied. By measuring the diffraction efficiency growth of holographically recorded gratings and studying the diffraction patterns obtained, the influence of scattering on the diffraction efficiency of thick volume holographic gratings was analyzed. It was found that, above a particular thickness and absorbance, the diffraction efficiency significantly decreased because of increased holographic scattering. From the diffraction efficiency dependence on absorbance and thickness it is possible to choose photopolymer layer properties that are suitable for a particular holographic application. This study was carried out to determine the highest layer thickness that could be used for phase code multiplexed holographic data storage utilizing thick photopolymer layers as a recording medium. Based on our studies to date we believe that the layer to be used for phase coded reference beam recording with 0.1 absorbance at 532 nm can have a thickness up to 450 microm. The potential use of thicker layers characterized by low scattering losses is part of our continuing research.