Tip-contact force control of a single-link flexible arm using feedback and parallel compensation approach

نویسندگان

  • Liang-Yih Liu
  • Hsiung-Cheng Lin
چکیده

Robotica / Volume 31 / Issue 05 / August 2013, pp 825 835 DOI: 10.1017/S026357471300012X, Published online: 13 February 2013 Link to this article: http://journals.cambridge.org/abstract_S026357471300012X How to cite this article: Liang-Yih Liu and Hsiung-Cheng Lin (2013). Tip-contact force control of a single-link exible arm using feedback and parallel compensation approach. Robotica, 31, pp 825-835 doi:10.1017/S026357471300012X Request Permissions : Click here

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Control of Flexible Link Robot using a Closed Loop Input-Shaping Approach

This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a  vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...

متن کامل

Stability Analysis for a Constrained Single-Link Flexible Arm using Linear Distributed Parameter Approach

The passivity-based PD force control of a constrained one-link flexible arm is investigated using a linear distributed parameter model. In order to overcome the inherent limitations caused by the non-minimum phase nature of the noncollocation of the joint torque input and the tip contact force output, a new input induced by the measurement of root bending moment and a virtual contact force outp...

متن کامل

Force Control of a Constrained One-link Flexible Arm : a Distributed-parameter Modeling Approach

The force control of a constrained one-link flexible arm is considered based on a linear distributed parameter model. To overcome the inherent limitations caused by the non-minimum phase nature of the noncollocation of the joint torque input and the tip contact force output, a passive transfer function is obtained by using the methods of feedback and output redefinition. A passivity-based PD co...

متن کامل

Dynamic Load Carrying Capacity of Mobile-Base Flexible-Link Manipulators: Feedback Linearization Control Approach

This paper focuses on the effects of closed- control on the calculation of the dynamic load carrying capacity (DLCC) for mobile-base flexible-link manipulators. In previously proposed methods in the literature of DLCC calculation in flexible robots, an open-loop control scheme is assumed, whereas in reality, robot control is achieved via closed loop approaches which could render the calculated ...

متن کامل

Gauge-Based Tip Position Control of a New Three-Degree-of-Freedom Flexible Robot

Flexible robots have given rise to numerous investigations, and their use is easily justified in two main cases: (1) when the weight of the robot has to be minimized and (2) when collisions of the robot with the environment are foreseen, as a flexible lightweight robot delivers less impact energy. Much work has been done by different authors on the position control of flexible robots using feed...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Robotica

دوره 31  شماره 

صفحات  -

تاریخ انتشار 2013