Low-Temperature Synthesis of Ultra-High-Temperature Coatings of ZrB 2 Using Reactive Multilayers
نویسندگان
چکیده
We demonstrate a route to synthesize ultra high-temperature ceramic coatings of ZrB2 at temperatures below 1,300 K using Zr/B reactive multilayers. Highly textured crystalline ZrB2 is formed at modest temperatures, because of the absence of any oxide at the interface between Zr and B, and the very short diffusion distance that is inherent to the multilayer geometry. The kinetics of the ZrB2 formation reaction is analyzed using high-temperature scanning nano-calorimetry, and the microstructural evolution of the multilayer is revealed using transmission electron microscopy. We show that the Zr/B reaction proceeds in two stages: (1) inter-diffusion between the nano-crystalline Zr and the amorphous B layers, forming an amorphous Zr/B alloy; and (2) crystallization of the amorphous alloy to form ZrB2. Scanning nano-calorimetry measurements performed at heating rates ranging from 3,100 to 10,000 K/s allow determination of the kinetic parameters of the multilayer reaction, yielding activation energies of 0.47 eV and 2.4 eV for Zr/B inter-diffusion and ZrB2 crystallization, respectively.
منابع مشابه
Low-Temperature Synthesis of Ultra-High-Temperature Coatings of ZrB<sub>2</sub> Using Reactive Multilayers
We demonstrate a route to synthesize ultra-high-temperature ceramic coatings of ZrB2 at temperatures below 1300 K using Zr/B reactive multilayers. Highly textured crystalline ZrB2 is formed at modest temperatures because of the absence of any oxide at the interface between Zr and B and the very short diffusion distance that is inherent to the multilayer geometry. The kinetics of the ZrB2 format...
متن کاملSynthesis and characterization of CrN/Mo2N multilayers and phases of Molybdenum nitride
CrNx, MoNx, CrOx, MoOx and CrN/Mo2N multilayer films were deposited by reactive sputtering. Characterization of the coatings was carried out using XRD, XPS, optical profilometer, and nano-indentation. The oxidation of the thin films was studied as a function of annealing temperature. Tribological characterization of the Cr2O3 and the Mo-oxides was carried out as a function of annealing temperat...
متن کاملEffects of Using Multilayers of High Resistance AFRP on Loading Capacity of Reinforced Concrete Beams in Comparison with Low Resistance AFRP Considering EBROG Method
Externally Bonded Reinforcement on Grooves (EBROG) is a new method that has been introduced to postpone or eliminate debonding of FRP sheets from concrete surface in concrete beams strengthened for flexure and increase loading capacity. For strengthening reinforced conceret beams in strructure, use of different types of FRP like: laminate, AFRP, CFRP, and GFRP. By there is some differences bet...
متن کاملTemperature activated self-lubrication in CrN/Mo2N nanolayer coatings
a r t i c l e i n f o Keywords: Lubricous oxides Hard coatings Lubricious oxides High temperature lubrication High temperature friction Temperature activated lubrication Multilayer coatings CrN/Mo 2 N In-situ lubrication Nanolayers Multilayered coatings Tool coatings Self lubrication Multi-layers Magnetron Sputtering Reactive sputtering CrN Mo 2 N CrN/Mo 2 N multilayers were deposited and TEM, ...
متن کاملUltra-thin Co/Pd multilayers with enhanced high-temperature annealing stability
Understanding the thermal budget of perpendicular materials is crucial for the potential application perpendicular magnetic tunnel junctions. In this paper, we study the effects of high-temperature rapid thermal annealing on the structural and magnetic properties of ultra-thin Co/Pd multilayers deposited at room temperature. It is shown that perpendicular magnetic anisotropy of ultra-thin Co/Pd...
متن کامل