Electrochemical Loading of Hydrogen and Deuterium Into Palladium and Palladium-Boron Alloys
نویسندگان
چکیده
Excess power production and other anomalous effects have been observed during the electrolysis of heavy water using palladium and palladium-boron alloys as the cathode materials. This study focused on hydrogen and deuterium loading into palladium and palladium-boron alloys. Improved calorimetry provided for the detection of the exothermic heat of absorption of deuterium into palladium and palladium-alloy cathodes. The addition of boron to palladium does not significantly affect the initial loading rate but slows further loading to higher levels. The presence of boron in the palladium significantly slows the rate of the deloading process. Cracks or other surface defects prevent high loading levels of hydrogen or deuterium into palladium or palladium-boron alloys.
منابع مشابه
Electrochemical Insertion of Hydrogen into Metals and Alloys
Hydrogen in metals has possible applications in various energy storage devices. For the palladium-deuterium system, excess power production and other anomalous effects have been reported. This study focused on hydrogen and deuterium insertion into palladium and deuterium insertion into various palladium-boron alloys. The condition of the metal surface is a major factor in the insertion of hydro...
متن کاملTritium Production from a Low Voltage Deuterium Discharge on Palladium and Other Metals
Over the past year we have been able to demonstrate that a plasma loading method produces an exciting and unexpected amount of tritium from small palladium wires. In contrast to electrochemical hydrogen or deuterium loading of palladium, this method yields a reproducible tritium generation rate when various electrical and physical conditions are met. Small diameter wires (100 250 microns) have ...
متن کاملWill, F
Highlights are presented of recent results obtained on deuterium and hydrogen loading of palladium both in electrolytes and in the gas phase. Reproducible tritium generation has been found on palladium cathodes with deuterium loadings approaching one deuterium atom per palladium atom. Tritium generation has been observed on four out of four such highly loaded cathodes. No tritium has been obser...
متن کاملMaterial Science on Pd-D System to Study the Occurrence of Excess Power
A recent joint work [1] identified the crucial role of material science in improving control of the Pd-D system to enhance the production of excess power during electrochemical loading of palladium foils with deuterium. Very high reproducibility, close to 100%, in loading Pd up to D/Pd ~1 (atomic fraction) was achieved. High loading about the threshold value of 0.9 is considered necessary to ac...
متن کاملSuperconductivity and Critical Field Strengths of Palladium-Boron-Hydrogen Alloys
für Naturforschung in cooperation with the Max Planck Society for the Advancement of Science under a Creative Commons Attribution 4.0 International License. Dieses Werk wurde im Jahr 2013 vom Verlag Zeitschrift für Naturforschung in Zusammenarbeit mit der Max-Planck-Gesellschaft zur Förderung der Wissenschaften e.V. digitalisiert und unter folgender Lizenz veröffentlicht: Creative Commons Namen...
متن کامل