The Design of PFM Mode DC-DC Converter with DT-CMOS Switch
ثبت نشده
چکیده
The high efficiency power management IC (PMIC) with switching device is presented in this paper. PMIC is controlled with PFM control method in order to have high power efficiency at high current level. Dynamic Threshold voltage CMOS (DT-CMOS) with low on-resistance is designed to decrease conduction loss. The threshold voltage of DT-CMOS drops as the gate voltage increase, resulting in a much higher current handling capability than standard MOSFET. PFM control circuits consist of a generator, AND gate and comparator. The generator is made to have 1.2MHz oscillation voltage. The DC-DC converter based on PFM control circuit and low on-resistance switching device is presented in this paper. Keywords—DT-CMOS, PMIC, PFM, DC-DC converter.
منابع مشابه
A High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملارائۀ یک مبدل غیر ایزولۀ DC-DC با ضریب افزایندگی بالا برای کاربرد در انرژی خورشیدی
In this paper, a new non-isolated transformerless high step up Dc-Dc converter with low voltage stress on the active switch for solar energy application is proposed. The converter topology is simple, which makes the control scheme simple. In this converter, only one active switch is used which makes reducing the switching power loss. The voltage gain of the proposed converter is higher than the...
متن کاملDesign of a CMOS DC-DC Converter -Adaptive CMOS DC-DC Converter for a Portable Battery Powered Systems-
Abstract In this paper, we describe a CMOS DC-DC converter with a variable output voltage (8-12V @100mA) for a portable battery-operated system applications. The proposed DC-DC converter is used along with a Pulse-Frequency Modulation (PFM) method and consists of a reference circuit, a feedback resistor, a controller, and an internal oscillator. The integrated DC-DC converter with two external ...
متن کاملAnalysis and Design of a New Single Switch Non-Isolated Buck-Boost dc-dc Converter
In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low v...
متن کاملAnalysis of New Transformerless dc-dc Converter With High Voltage Gain
In some industries applications such as fuel cells, we must use a high voltage gain dc-dc converters for increasing voltage, but, the conventional converters cannot provide the high voltage gain with increasing duty cycle and the converters efficiency is limited by the equivalent series resistances. For this reason, in this paper, a single switch transformerless high step-up dc-dc converter wit...
متن کامل