Preparation of Fluoroalkyl End-Capped Vinyltrimethoxysilane Oligomeric Silica Nanocomposites Containing Gluconamide Units Possessing Highly Oleophobic/Superhydrophobic, Highly Oleophobic/Superhydrophilic, and Superoleophilic/Superhydrophobic Characteristics on the Modified Surfaces
نویسندگان
چکیده
Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2-CHSi(OMe)3)n-RF (RF-(VM)n-RF)] undergoes the sol-gel reaction in the presence of N-(3-triethoxysilylpropyl)gluconamide [Glu-Si(OEt)3] under alkaline conditions to afford the corresponding fluorinated oligomeric silica nanocomposites containing gluconamide units [RF-(VM-SiO3/2)n-RF/Glu-SiO3/2]. These obtained nanocomposites were applied to the surface modification of glass to provide the unique wettability characteristics such as highly oleophobic/superhydrophobic and highly oleophobic/superhydrophilic on the modified surfaces under a variety of conditions. Such a highly oleophobic/superhydrophobic characteristic was also observed on the modified PET (polyethylene terephthalate) fabric swatch, which was prepared under similar conditions, and this modified PET fabric swatch was applied to the separation membrane for the separation of the mixture of fluorocarbon oil and hydrocarbon oil. The RF-(VM-SiO3/2)n-RF/Glu-SiO3/2 nanocomposites, which were prepared under lower feed amounts of basic catalyst (ammonia), were found to cause gelation in water. Interestingly, it was demonstrated that these gelling nanocomposites are also applied to the surface modification of the PET fabric swatch to give a highly oleophobic/superhydrophobic characteristic on the surface. On the other hand, the modified glass surfaces treated with the corresponding nanocomposite possessing no gelling ability were found to supply the usual hydrophobic characteristic with a highly oleophobic property. More interestingly, the wettability change on the modified PET fabric swatch from highly oleophobic to superoleophilic was observed, and remained superhydrophobic after immersing the modified PET fabric swatch into water.
منابع مشابه
Bioinspired, roughness-induced, water and oil super-philic and super-phobic coatings prepared by adaptable layer-by-layer technique
Coatings with specific surface wetting properties are of interest for anti-fouling, anti-fogging, anti-icing, self-cleaning, anti-smudge, and oil-water separation applications. Many previous bioinspired surfaces are of limited use due to a lack of mechanical durability. Here, a layer-by-layer technique is utilized to create coatings with four combinations of water and oil repellency and affinit...
متن کاملNanostructured superhydrophobic films synthesized by electrodeposition of fluorinated polyindoles
Materials with bioinspired superhydrophobic properties are highly desirable for many potential applications. Here, nine novel monomers derived from indole are synthesized to obtain these properties by electropolymerization. These monomers differ by the length (C4F9, C6F13 and C8F17) and the position (4-, 5- and 6-position of indole) of the perfluorinated substituent. Polymeric films were obtain...
متن کاملOn the Oil Repellency of Nanotextured Aluminum Surface
Two different superhydrophobic surfaces were elaborated and their oil repellency behavior was evaluated using several liquid with different surface tension. A silicone rubber/SiO2 nanocomposite coated (A) on aluminum substrate by “spin-coating” and the sample B was an anodized aluminum surface covered by Teflon-like coating. A high static contact angle about ∼162° was measured for two prepared ...
متن کاملSuperhydrophobic and oleophobic fibers by coaxial electrospinning.
Control of surface wetting properties to produce strongly hydrophobic or hydrophilic effects is at the heart of many macro- and microfluidic applications. In this work, we have investigated coaxial electrospinning to produce core-sheath-structured nano/microfibers that combine different properties from individual core and sheath materials. Teflon AF is an amorphous fluoropolymer that is widely ...
متن کاملMechanically durable superhydrophobic surfaces.
Development of durable non-wetting surfaces is hindered by the fragility of the microscopic roughness features that are necessary for superhydrophobicity. Mechanical wear on superhydrophobic surfaces usually shows as increased sticking of water, leading to loss of non-wettability. Increased wear resistance has been demonstrated by exploiting hierarchical roughness where nanoscale roughness is p...
متن کامل