Micro Cooling Application on High Density Memory Module
نویسندگان
چکیده
The numerical simulation and two kinds of experiments are conducted to investigate the thermal performance of several kinds of heat spreaders for high power memory module. For numerical study, commercial code, Flotherm, is used to model the 1GByte DDR memory module array. The convection heat transfer is analyzed for the memory module array with solid heat spreader under the airflow condition. For the wind tunnel experiment, solid plate and block type spreaders are examined to obtain the thermal resistance of conjugate heat transfer of solid under the various airflow conditions. Also, to clarify the thermal characteristics and cooling capacity of liquid heat transport, newly designed liquid cooling devices such as embedded heat pipe spreader and vapor chamber with micro wick structure are proposed and evaluated by the heat transport experiment with water cold plate under the insulation condition.
منابع مشابه
CHF determination for high-heat flux phase change cooling system incorporating both micro-channel flow and jet impingement
This paper explores the subcooled nucleate boiling and critical heat flux (CHF) characteristics of a hybrid cooling module that combines the cooling attributes of micro-channel flow and jet impingement. A test module was constructed and tested using HFE-7100 as working fluid. Increasing the coolant’s flow rate and/or subcooling shifted both the onset of boiling (ONB) and CHF to higher heat flux...
متن کاملSingle-phase and two-phase heat transfer characteristics of low temperature hybrid micro-channel/micro-jet impingement cooling module
This study examines the single-phase and two-phase cooling performance of a hybrid micro-channel/micro-jet impingement cooling scheme using HFE 7100 as working fluid. This scheme consists of supplying coolant from a series of jets that deposit liquid into the micro-channels. A single-phase numerical scheme that utilizes the k–e turbulent model and a method for determining the extent of the lami...
متن کاملNumerical Modeling of the Shear Module of Alginate Micro-Beads under the Ultrasonic Thermal Effect
The mechanical properties of microscopic particles have been a heated research object for it takes the deformation of micro-beads in the microfluidic environment into account. Sufficient knowledge on mechanical properties of micro-beads would lead to better device design and application for cell mechanics, tissue engineering, etc. The physical properties of alginate beads were examined both in ...
متن کاملEffects of jet pattern on single-phase cooling performance of hybrid micro-channel/micro-circular-jet-impingement thermal management scheme
This study explores the single-phase cooling performance of a hybrid cooling module in which a series of micro-jets deposit coolant into each channel of a micro-channel heat sink. This creates symmetrical flow in each micro-channel, and the coolant is expelled through both ends of the micro-channel. Three micro-jet patterns are examined, decreasing-jet-size (relative to center of channel), equa...
متن کاملIntegrated Power Conditioning for Laser Diode Arrays
For several years, the Laser Program at LLNL has been designing and building a variety of specialized compact laser systems 1. They offer extremely high energy densities for their size and are primarily used in medical and military applications where a high premium is placed on both reliability and compactness. These systems are based upon a 2 cm-x-2 em liquid cooled wafer (Fig. 1) that support...
متن کامل