Research on Friction and Wear Properties of MC Nylon/ Carbon Nano Tubes Composites
نویسندگان
چکیده
In this article, MC nylon/carbon nano tubes (CNTs) composites were prepared by in-situ polymerization method. The friction and wear properties were determined. The sample wear surface morphology carried out by scanning electron microscope (SEM) and the wear mechanism was investigated. It was found that the friction coefficient of composites has decreased with the amount of CNTs increasing in the composites. Addition amount of CNTs is up to 0.3% (weight percent), abrasion index decreased to minimum. The abrasion index of the sample of wearing a long time is smaller than that of the sample of wearing a short time. The sample with wearing less time mainly take place adhesive wear, however, mainly happen abrasive wear and adhesive wear for wearing time is longer. Further more, carbon nano tubes (CNTs) are not only improve the wear resistance of composites but also improve the mechanics performance.
منابع مشابه
Evaluation of hardness and wear resistance of nano-sized titanium-carbide-reinforced commercially cast aluminum alloy matrices
Production of aluminum matrix composites is widespread because these material provide enhanced mechanical properties compared to aluminum. One the most important parameters of metal matrix composite production is uniform distribution of reinforcing nanoparticles in matrices using the stir-casting method. Second is ensuring high wettability, which is determined by evaluating the properties of ma...
متن کاملEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملInvestigation of Mechanical Properties Prediction of Synthesized Nylon-66/Nano-Calcium Carbonate Composites
In this research, the influence of adding micro- and nano- sized calcium carbonate powders to nylon-66 was investigated. Mechanical properties of micro and nano- composites, including tensile strength, elongation, and Young’s modulus, before and after ageing, were determined and analyzed. For this purpose, micro- and nano-sized CaCO3 particles were used as fillers to prepare micro-composites (c...
متن کاملEnhancement of friction between carbon nanotubes: an efficient strategy to strengthen fibers.
Interfacial friction plays a crucial role in the mechanical properties of carbon nanotube based fibers, composites, and devices. Here we use molecular dynamics simulation to investigate the pressure effect on the friction within carbon nanotube bundles. It reveals that the intertube frictional force can be increased by a factor of 1.5-4, depending on tube chirality and radius, when all tubes co...
متن کاملThe Effect of Simultaneous Incorporation of PTFE Nanoparticles and Carbon Nanotubes on the Tribological Behavior of Ni-P Coating
In some engineering fields, wear resistance and a low friction coefficient are required at the sametime. In this research, PTFE nanoparticles and carbon nanotubes were co-deposited within Ni-Pmatrix to obtain an Ni-P-PTFE-CNT hybrid coating for wear resistance and a low friction coefficient.The tribological properties of the deposits were evaluated by pin on disc tribometer. T...
متن کامل