Stator-flux-oriented control of a doubly-fed induction machine with and without position encoder - Electric Power Applications, IEE Proceedings-
نویسندگان
چکیده
Tlie control of a doubly-fed induction machine (DFM) with a id without tlie use of a rotor position encoder is examined. First, a stator fliix linkage oriented control scheme for power and speed control, with a position encoder, shows the high performance control capabilities of this control arrangement and serves a s foundation for the sensorless scheme. The power-control method is then applied to a sensorless method, based on a previous control arrangement. This method is then exteiideci to derive a sensorless speed-control mechanism for the DFM. All control schemes are iniplenicntcd and pertbimcd on an experimental test system, comprising two 8OC167 microcontrollers and a 2.251tW wound rotor induction machine.
منابع مشابه
Indirect stator flux-oriented output feedback control of a doubly fed induction machine
A new indirect stator flux field-oriented output feedback control for Doubly Fed Induction Machine is presented. It assures global exponential torque tracking and stabilization of the stator-side power factor at unity level, provided that electric machine physical constraints are satisfied. Based on the inner torque control system, a speed tracking controller, with load torque compensation is d...
متن کاملA Combined Vector and Direct Power Control for AC/DC/AC Converters in DFIG Based Wind Turbine
The doubly-fed generators (DFIG) have clear superiority for the applications of large capacity and limited-range speed control case due to the partially rated inverter, lower cost and high reliability. These characteristics enable the doubly-fed wound rotor induction machine to have vast applications in wind-driven generation.In this paper Combined Vector and direct power control (CVDPC) strate...
متن کاملA doubly fed induction generator using back-to-back PWM converters supplying an isolated load from a - Electric Power Applications, IEE Proceedings-
A doubly fed induction generator (DFIG) designed to be driven at variable speed from a wind turbine and supplying an isolated load is presented. Two back-to-back PWM voltage-fed inverters connected between the stator and the rotor allow suband super-synchronous operation with low distortion currents. The load voltage is maintained at constant frequency and its magnitude is regulated through con...
متن کاملSliding-Mode-based Improved Direct Active and Reactive Power Control of Doubly Fed Induction Generator under Unbalanced Grid Voltage Condition
This paper proposes an improved direct active and reactive power control (DPC) strategy for a grid-connected doubly fed induction generator (DFIG) based wind-turbine system under unbalanced grid voltage condition. The method produces required rotor voltage references based on the sliding mode control (SMC) approach in stationary reference frame, without the requirement of synchronous coordinate...
متن کاملDecoupled Control of Active and Reactive Power for a Grid-connected Doubly-fed Wound Rotor Induction Machine without Position Sensors
Abstruct In this paper field-oriented control of a doubly-fed wound rotor induction machine without shaft position sensors is presented. The stator is directly connected to the constant frequency three phase grid and the rotor currents are appropriately controlled to vary the slip power thereby enabling variable speed constant frequency operation. Instead of using dynamic angle controllers for ...
متن کامل