Modelling Valve Stiction 1

نویسندگان

  • Shoukat Choudhury
  • N. F. Thornhill
چکیده

The presence of nonlinearities, e.g., stiction, and deadband in a control valve limits the control loop performance. Stiction is the most commonly found valve problem in the process industry. In spite of many attempts to understand and model the stiction phenomena, there is a lack of a proper model, which can be understood and related directly to the practical situation as observed in real valves in the process industry. This study focuses on the understanding, from real life data, of the mechanism that causes stiction and proposes a new data-driven model of stiction, which can be directly related to real valves. It also validates the simulation results generated using the proposed model with that from a physical model of the valve. Finally, valuable insights on stiction have been obtained from the describing function analysis of the newly proposed stiction model.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fuzzy gain scheduling of PID controller for stiction compensation in pneumatic control valve

Inherent nonlinearities like, deadband, stiction and hysteresis in control valves degenerate plant performance. Valve stiction standouts as a more widely recognized reason for poor execution in control loops. Measurement of valve stiction is essential to maintain scheduling. For industrial scenarios, loss of execution due to nonlinearity in control valves is an imperative issue that should be t...

متن کامل

Parameter Estimation of Valve Stiction Using Ant Colony Optimization

In this paper, a procedure for quantifying valve stiction in control loops based on ant colony optimization has been proposed. Pneumatic control valves are widely used in the process industry. The control valve contains non-linearities such as stiction, backlash, and deadband that in turn cause oscillations in the process output. Stiction is one of the long-standing problems and it is the most ...

متن کامل

Novel Closed-loop Stiction Detection and Quantification Method via System Identification

In this paper, a novel detection and quantification method of control valve stiction is discussed. A time delay estimation method is presented for processes under an oscillating state. A suitable model structure of valve stiction is chosen prior to conducting valve stiction detection and quantification. Given the stiction model structure, a bounded search space of a stiction model is defined an...

متن کامل

Practical Model and Detection Algorithm for Valve Stiction

Stiction is the most common problem in pneumatic control valves, which are widely used in the process industry. Stiction causes fluctuation of process variables, which lowers productivity. Therefore, developing a method to detect stiction and distinguish it from other causes is crucial to help operators take an appropriate action for improving control performance. The present work proposes a va...

متن کامل

The method based on the calculation of areas before and after the peak of an oscillating signal

Stiction in control valve is one of the long-standing and common problems in the process industries, which accelerates equipment wear and even affects the stability of closed-loop systems. A valve stiction model is proposed to describe the dynamic feature of sticky valve. To detect and quantify valve stiction, a bootstrap Hammerstein system identification procedure is proposed. Through the iden...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004