Minimax Design of Complex-Coefficient FIR Filters with Low Group Delay
نویسندگان
چکیده
This paper presents a least-pth approach for the design of complex-coefficient FIR digital filters with low group delay in the minimax sense. Features of the proposed approach include: it does not need to adapt the weighting function involved and no constrains are imposed during the course of optimization. More important, the algorithm enjoys global convergence to the minimax design regardless of the initial design used. This property is an immediate consequence of the fact that for each even power p, the weighted Lp objective function is convex in the entire parameter space. Two minimax designs of FIR filter with low passband group delay are included to illustrate the proposed method.
منابع مشابه
Adjustable Fractional Delay FIR Filters Design Using Multirate and Frequency Optimization Techniques
Abstract— One of the most efficient implementation for adjustable fractional delay FIR filter is the Farrow structure, allowing on line fractional delay value update with a fixed branch filters set. A wideband fractional delay FIR filter requires high number of branch filters and high branch filters length, which results in a complex arithmetic implementation. This paper describes a multirate...
متن کاملDesign of Low-Delay FIR Half-Band Filters with Arbitrary Flatness and Its Application to Filter Banks
Half-band filters are a class of important filters among digital filters, and have been widely used in many applications such as filter banks and wavelets. The conventional methods are mainly concerned with FIR half-band filters with exactly linear phase. However, the exactly linear phase filters have a drawback of large group delay when high-order filters are required. In this paper, the desig...
متن کاملThree different criteria for the design of two-dimensional zero phase FIR digital filters
A new error criterion for the design of FIR filters is proposed. Filters with relatively many free filter coefficients are designed using the Chebyshev, the WLS, and a new partitioned minimax error criterion and the performance of the filters is compared. A general and fast technique for the WLS design is also presented.
متن کاملAcrobat Distiller, Job 6
The perfect linear phase requirement can be achieved only by direct design with an FIR filter at the expense of high filter order and hence high computational burden for the given specification. Alternatively, IIR filters can be designed with much smaller orders than their FIR counterparts, but at the expense of the nonlinear phase. However, it is possible to design almost linear-phase IIR filt...
متن کاملDesign of Low Delay Bandpass FIR Filters with Maximally Flat Characteristics in the Passband and the Transmission Zeros in the Stopband
Abstract: The large group delay of the high order FIR filters is unacceptable in some applications. Therefore, recently, how to reduce the group delay of FIR filters has been studied intensively. To reduce the ringing in the time domain and to maximize the stopband attenuation, it is useful to design FIR filters with maximally flat characteristics in the passband and transmission zeros in the s...
متن کامل