Sacrificial layer electrophoretic deposition of free-standing multilayered nanoparticle films.
نویسندگان
چکیده
Sacrificial layer electrophoretic deposition (SLED) is a technique to assemble nanoparticles that yields free-standing, multilayered nanoparticle films with macroscopic lateral dimensions after the sacrificial layer is dissolved.
منابع مشابه
Multi-step Electrophoretic Deposition of α-Al2O3 Nanoparticles on Carbon Substrate (TECHNICAL NOTE)
in the present study, electrophoretic deposition (EPD) was used to obtain dense and crack-free layers of Al2O3 on carbon substrate. Microstructural study of the obtained layers by scanning electron (SEM) and optical microscopy (OM) approved that crack-free layers can be obtained by EPD technique. According to obtained results, isopropanol is a suitable media to obtian compact layers which is at...
متن کاملUse of Amphoteric Copolymer Films as Sacrificial Layers for Constructing Free-Standing Layer-by-Layer Films
The present paper reports the use of an amphoteric copolymer, poly(diallylamine-co-maleic acid) (PDAMA), as a component of precursor layers (or sacrificial layers) for constructing free-standing layer-by-layer (LbL) films. A PDAMA-poly(styrenesulfonate) (PSS) film or PDAMA-poly(dimethyldiallylammonium chloride) (PDDA) film was coated on the surface of a quartz slide at pH 4.0 or 8.0, respective...
متن کاملUltrathin free-standing close-packed gold nanoparticle films: conductivity and Raman scattering enhancement.
A simple filtration technique was developed to prepare large scale free-standing close-packed gold nanoparticle ultrathin films using metal hydroxide nanostrands as both barrier layer and sacrificial layer. As thin as 70 nm, centimeter scale robust free-standing gold nanoparticle thin film was obtained. The thickness of the films could be easily tuned by the filtration volumes. The electronic c...
متن کاملCucurbit[8]uril-based stimuli-responsive films as a sacrificial layer for preparation of free-standing thin films.
A pseudo-polycation was prepared based on the supramolecular cucurbit[8]uril ternary complex. It was then layer-by-layer assembled with poly(acrylic acid) to fabricate a stimuli-responsive film, which exhibited disassembly properties in response to stimuli, providing a supramolecular route for the fabrication of free-standing thin films.
متن کاملFabrication of Large-area Free-standing Ultrathin Polymer Films.
This procedure describes a method for the fabrication of large-area and ultrathin free-standing polymer films. Typically, ultrathin films are prepared using either sacrificial layers, which may damage the film or affect its mechanical properties, or they are made on freshly cleaved mica, a substrate that is difficult to scale. Further, the size of ultrathin film is typically limited to a few sq...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 25 شماره
صفحات -
تاریخ انتشار 2009