Approaching the microjoule frontier with femtosecond laser oscillators
نویسندگان
چکیده
Broadening the ultrashort laser pulse in a Kerr-lens mode-locked laser by net positive round-trip group-delay dispersion has proven to be a powerful concept for scaling the pulse energy directly achievable with a femtosecond laser oscillator without external amplification. Drawing on this concept, we demonstrate here Ti : Sa chirped-pulse oscillators delivering sub-40 fs pulses of 0.5μJ and 50 nJ energy at average power levels of 1 and 2.5 W (repetition rate: 2 and 50 MHz), respectively, which to the best of our knowledge constitute the highest pulse energy and average power achieved with a femtosecond (<100 fs) laser oscillator to date. The 0.5 μJ pulses have a peak power in excess of 10 MW and reach a peak intensity >1015 W cm−2 (when focused down to ∼1 μm2), both of which represent record values from a laser oscillator. These pulse parameters appear to be limited merely by the pump power available, affording promise of scaling chirped-pulse femtosecond Ti : Sa oscillators to microjoule pulse energies and—by simultaneous spectral broadening—towards peak power levels of several hundred megawatts. 6 Author to whom any correspondence should be addressed. New Journal of Physics 7 (2005) 216 PII: S1367-2630(05)00640-3 1367-2630/05/010216+11$30.00 © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft 2 Institute of Physics DEUTSCHE PHYSIKALISCHE GESELLSCHAFT
منابع مشابه
High Energy/High Repetition Rate Laser Pulses from Yb Based Solid State Oscillators with Cavity-Dumping and Regenerative Amplifiers
Various scientific and industrial laser applications profit from the latest progress of directly diode pumped high-power femtosecond oscillators, in particular applications such as laser micromachining, nonlinear spectroscopy, or laser surgery. These oscillators provide pulse energies in the microjoule regime at 100 kHz to megahertz repetition rates, replacing complex and expensive chirpedpulse...
متن کاملAll-optical, in-situ histology of neuronal tissue with femtosecond laser pulses
Goal We describe the application of femtosecond laser pulses to image and ablate neuronal tissue for the purpose of automated histology. The histology is accomplished in-situ by serial two-photon imaging of labeled tissue and removal of the imaged tissue with amplified, approximately 100 fs duration pulses, as illustrated schematically in figure 1A. The ablation of tissue with femtosecond, infr...
متن کاملTexturing of titanium (Ti6Al4V) medical implant surfaces with MHz-repetition-rate femtosecond and picosecond Yb-doped fiber lasers.
We propose and demonstrate the use of short pulsed fiber lasers in surface texturing using MHz-repetition-rate, microjoule- and sub-microjoule-energy pulses. Texturing of titanium-based (Ti6Al4V) dental implant surfaces is achieved using femtosecond, picosecond and (for comparison) nanosecond pulses with the aim of controlling attachment of human cells onto the surface. Femtosecond and picoseco...
متن کاملThe study of propagation of a femtosecond laser pulse in the breast tissue
In this paper, the evaluation of time profile of a femtosecond pulse laser propagated through biological tissues is studied. The majority of the biological tissues with a high scattering anisotropy must be considered as turbid media, that their optical responses are complicated. To study the propagation of ultra-short pulse in turbid media, the diffuse equation is used. In this study, the analy...
متن کاملShort pulse laser technologies for advanced accelerator applications
Next generation short pulse laser systems for high energy accelerator physics have been developed using novel synchronization techniques. The basic techniques are the synchronization of a mode locked oscillator to an RF reference, synchronization of two mode locked oscillators, synchronization of a lowrepetition amplifier to the oscillator, and multiplexing of modular laser beams. We have devel...
متن کامل