Detection of Faults in AC to AC Converter Fed Induction Motor Driver

نویسندگان

  • Vivek Sharma
  • Gaurav Mendiratta
چکیده

This paper presents simulation results of the harmonics analysis of motor current signatures under different fault condition of CSI (Current Source Inverter) fed induction motor drive. In this work, simulation studies are performed for two different post fault conditions i.e. open circuiting of one of the six IGBTs(Insulated Gate Bipolar Transistor) gate, blowing off one IGBT .Under these fault conditions, time domain and frequency domain analyses are performed. The simulation results are presented.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Combined Vector and Direct Power Control for AC/DC/AC Converters in DFIG Based Wind Turbine

The doubly-fed generators (DFIG) have clear superiority for the applications of large capacity and limited-range speed control case due to the partially rated inverter, lower cost and high reliability. These characteristics enable the doubly-fed wound rotor induction machine to have vast applications in wind-driven generation.In this paper Combined Vector and direct power control (CVDPC) strate...

متن کامل

A Three phase Transformerless Buck Boost AC/AC converter for Induction motor fed drive applications

This paper proposes a three phase transformerless AC/AC converter which can perform both buck and boost operations based on the voltage requirements. This AC/AC converter is mainly proposed for the three phase induction motor drives with the intention to reduce the high inrush current of the conventional motor used in industrial applications. The merits of the proposed AC/AC converter can be un...

متن کامل

Fuzzy Logic Speed Control Algorithm of Induction Motor Fed by Direct Matrix Converter

In this paper, the speed control of an induction motor fed by matrix converter using fuzzy logic controller is proposed. In order to achieve high performance control of matrix converter fed the induction motor drive system, a combined controller Venturini and direct field oriented control (FOC) algorithms is proposed. The present paper focuses about the artificial intelligence technique particu...

متن کامل

کنترل مستقیم گشتاور و ضریب توان یک موتور القایی با خطی سازی ورودی-خروجی با استفاده از مبدل ماتریسی

Direct torque control (DTC) is a fast and simple torque control method for induction motor without speed sensor. Conventional AC-DC-AC converter has a large DC link capacitor and low power factor in the input power line. In the matrix converters the DC link capacitor can be reduced and the unity input power factor can be obtained. In this paper a new method for direct torque and stator flux con...

متن کامل

Direct Torque Control of Induction Machine Fed by a Matrix Converter

The matrix converter system is competitive solution to replace the conventional two stage ac to ac converter. In this paper, a matrix converter driving a speed-controlled induction machine is examined under open-switch fault. First, a-predictive direct torque method is proposed using only the motor torque and current. Second, a motor speed control is presented. The proposed techniques do not re...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013