Mechanical Properties of Manufactured-Sand Concrete after High Temperatures
نویسندگان
چکیده
In this paper, to study mechanical properties of manufactured-sand concrete after high temperatures, experiments on the residual strength of manufactured-sand concrete were carried out under high temperatures in which raw materials performances and concrete mixture proportion were considered. The mechanism of elevated temperatures on residual strength was theoretically discussed, and the calculation formula of residual strength was given. The results indicated that with the increasing of temperature, the mass loss was small while the reducing of strength and the elastic modulus of manufactured-sand concrete were significantly.
منابع مشابه
Investigation of mechanical and durability properties of lightweight concrete containing Pumice
In this research, the effect of the cement, sand, and pumice mixture on the durability of lightweight concrete is investigated. The intention of this paper is to replace a certain amount of the pumice percentage as an alternative option of the cement and pumice sand aggregate with conventional sand components. The experimental results include compressive strength, ion-chloride emission factor (...
متن کاملAn Investigation into the Use of Manufactured Sand as a 100% Replacement for Fine Aggregate in Concrete
Manufactured sand differs from natural sea and river dredged sand in its physical and mineralogical properties. These can be both beneficial and detrimental to the fresh and hardened properties of concrete. This paper presents the results of a laboratory study in which manufactured sand produced in an industry sized crushing plant was characterised with respect to its physical and mineralogical...
متن کاملEffect of Polypropylene Fibers on Strength and Thermal Resistance of Concrete
In this paper, the effect of Polypropylene Fibers added to concrete on strength and thermal resistance of high strength concrete has been investigated. Therefore, five tests have been carried out to reach this goal which it includes; effect of weight percent of polypropylene fibers on mechanical properties of concrete, effect of fiber’s length on the strength of high strength concrete, effect o...
متن کاملResidual Mechanical Properties of Concrete Made with Crushed Clay Bricks and Roof Tiles Aggregate after Exposure to High Temperatures
This paper presents the residual mechanical properties of concrete made with crushed bricks and clay roof tile aggregates after exposure to high temperatures. One referent mixture and eight mixtures with different percentages of replacement of natural aggregate by crushed bricks and roof tiles are experimentally tested. The properties of the concrete were measured before and after exposure to 2...
متن کاملMechanical Properties of Concrete Containing Tire Rubber Particles toward Constant Development
With many years of construction and application of common concrete, researchers have always been searching for a better composition. One of the notable ideas for achieving such a composition is using recycled materials. One of the materials which is suitable for environment and constant development is damaged tires .For studying mechanical properties of concrete containing tire particles, a ser...
متن کامل