Design of UWB Microstrip Filter Using Quarter Wavelength Short Circuited Stubs
نویسندگان
چکیده
In this paper a high performance Ultra Wide Band microstrip bandpass filter is presented. The filter is designed using λ/4 short circuited stubs to improve the performance of UWB. The designed filter is based on 5th order chebyshev low pass prototype with .1 dB passband ripples. The filter with total size of 45×11 mm operates within 3.1310.4 GHz, produces a fractional bandwidth of 106%. The filter is designed on a polystyrene substrate with relative dielectric constant of 2.6 and a thickness of 1.27mm. The simulated result using HFSS shows an insertion loss (S21) less than -0.1dB and return loss (S11) better than -16.5 dB. Group delay is also flat in passband.
منابع مشابه
Ultra-Wideband Bandpass Filter Using Hybrid Microstrip-Defected-Ground Structure
A novel ultra-wideband (UWB) bandpass filter (BPF) with a fractional bandwidth (FBW) of about % 110 is presented using the hybrid microstrip-defected-ground structure (DGS). The proposed filter was designed using a combination of hybrid microstrip-defected-ground structure lowpass filter (LPF) with typical quarter-wavelength short-circuited stubs highpass filter (HPF), followed by an optimizati...
متن کاملDesign and Analysis of Triple Notched Band Uwb Band Pass Filter Using Defected Microstrip Structure (Dms)
This paper presents design, simulation, fabrication and electrical analysis of a triple notched band UWB band pass filter. Short circuit stubs and microstrip line defected structures are used to design a triple notched band UWB filter. The proposed UWB BPF consists of five short circuited stubs of quarter wavelength attached to the feed line. The notched bands are created by introducing three U...
متن کاملMatlab / Simulink Implementation of Wave - based Models for Microstrip Structures utilizing Short - circuited and Opened
This paper describes modeling and analyzing procedures for microstrip filters based on use of one-dimensional wave digital approach. Different filter structures are observed. One filter is based on quarter-wave length short-circuited stubs and connecting transmission lines. The other one is based on cross-junction opened stubs. Frequency responses are obtained by direct analysis of the block-ba...
متن کاملNovel Band-Notched UWB Bandpass Filter Using Microstrip/Slotline Ring Resonators
A novel ultra-wideband (UWB) bandpass filter (BPF) with notched band based on microstrip/slotline ring resonators is presented in this paper. The UWB BPF is fabricated with two microstrip ring resonators on the top copper layer and a slotline ring resonator on the bottom ground layer. Thus, an ultra-wide passband can be achieved owing to the coupling effects and microstrip/slotline transitions ...
متن کاملUltra-Wideband (UWB) Microstrip Bandpass Filter with an Improved Wide Stopband
— In this paper, the ultra-wideband (UWB) bandpass filter (BPF) with a wide stopband is presented. The prototype of proposed UWB BPF is by bending the five short-circuited stubs and coupling the I/O feed lines. In order to have a wide stopband, an bandstop structure embedded in input/output (I/O) lines without degrading the passband performances is used. The measured results verified that by us...
متن کامل