Formation of Bronzes during Temperature-programmed Reduction of MoO3 with Hydrogen - An In situ XRD and XAFS Study

نویسندگان

  • T. Ressler
  • J. Wienold
  • R. E. Jentoft
چکیده

The temperature-programmed reduction of MoO3 from 300 K to 773 K in 50 vol-% hydrogen in He (10 Pa) at different heating rates (0.1, 0.2, and 5 K/min) was investigated by in situ XRD and XAFS. At heating rates of ~ 0.1 and ~ 0.2 K/min the formation of the molybdenum bronze H0.34MoO3 was observed by in situ XRD in the early stage of the reduction of MoO3. At a heating rate of 5 K/min the formation of a more disordered bronze (HxMoO3 with x ~ 0.07) prior to the detection of the product phase MoO2 was observed by in situ XAFS. In both studies the consumption of the bronze was found prior to the complete reduction of MoO3. A simplified mechanism for the temperature-programmed reduction of MoO3 in hydrogen is proposed that includes (i) in corporation of H2 in the MoO3 bulk and formation of a more or less ordered bronze, (ii) consumption of the bronze and formation of nucleation site for MoO2, (iii) nucleation of MoO2 and nuclei growth.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Solid-state kinetics from time-resolved in situ XAFS investigations: reduction and oxidation of molybdenum oxides.

The reduction of MoO3 with hydrogen was studied by in situ X-ray absorption spectroscopy. The experiments performed focused on elucidating phase composition and evolution with time under isothermal reduction conditions. From temperature programmed experiments short-range structural details about the early stage of the reduction were obtained.

متن کامل

Bulk Structural Investigation of the Reduction of MoO3 with Propeneand the Oxidation of MoO2 with Oxygen

Reduction of MoO3 in propene and oxidation of MoO2 in oxygen are investigated by in situ X-ray diffraction (XRD) and Xray absorption spectroscopy (XAS). Temperature-programmed and isothermal experiments (573–773 K) are performed to elucidate the structural evolution of phases present during the reactions and, in addition, to reveal the solid-state kinetics of the processes involved. During the ...

متن کامل

Mechano-chemical activation of MoO3-CuO/C powder mixture to synthesis nano crystalline Mo-Cu alloy

In this study, a high energy planetary ball milling technique was used to synthesize nano-crystalline Mo-Cu alloys. Molybdenum trioxide (MoO3) and copper oxide (CuO) were used as the starting materials. Carbo-thermal co-reduction of mixed Mo and Cu oxides powders was done with milling followed by a heat treatment at a high temperature. Differential thermal analysis/thermogravimetric (DTA/TG) wa...

متن کامل

The role of carburization temperature on the molybdenum carbide surface and their catalytic activity

The surfaces of molybdenum carbide were varied by changing the carburization temperature between 823 and 1123 K. The surfaces of the catalytic material were investigated using in-situ temperature program carburization followed by temperature program reduction and oxidation. In-situ temperature program oxidation (TPO) showed the surfaces of the catalysts contain a similar amoun...

متن کامل

Phase formation during the decomposition of ammonium heptamolybdate--an in situ XAFS and XRD investigation.

The decomposition of ammonium heptamolybdate was investigated by in situ XAFS and in situ XRD to elucidate the influence of different atmospheres on the products formed the formation of different decomposition products and various intermediates is described in detail.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001