Strong infrared absorber: surface-microstructured Au film replicated from black silicon.
نویسندگان
چکیده
With quasi-periodic microstructures, great enhancement of infrared light absorption of Au film over a broad wavelength band (2.7~15.1 μm) was realized experimentally for the first time. The microstructured Au film was prepared by replica molding of the surface of femtosecond (fs) laser microstructured silicon (black silicon). This unique absorption characteristic is mainly ascribed to good impedance match from free space to Au film. The surface of the sample was examined by X-ray photoelectron spectroscopy (XPS) and the four peaks of absorptance were ascribed to residual polydimethylsiloxane (PDMS), H2SO4, adsorbed water and CO2 in the air, respectively.
منابع مشابه
Large area and broadband ultra-black absorber using microstructured aluminum doped silicon films
A large area and broadband ultra-black absorber based on microstructured aluminum (Al) doped silicon (Si) films prepared by a low-cost but very effective approach is presented. The average absorption of the absorber is greater than 99% within the wide range from 350 nm to 2000 nm, and its size reaches to 6 inches. We investigate the fabrication mechanism of the absorber and find that the Al ato...
متن کاملBroadband near-infrared metamaterial absorbers utilizing highly lossy metals
Radiation absorbers have increasingly been attracting attention as crucial components for controllable thermal emission, energy harvesting, modulators, etc. However, it is still challenging to realize thin absorbers which can operate over a wide spectrum range. Here, we propose and experimentally demonstrate thin, broadband, polarization-insensitive and omnidirectional absorbers working in the ...
متن کاملDesign of a perfect black absorber at visible frequencies using plasmonic metamaterials.
The design and fabrication of a plasmonic black absorber with almost 100% absorbance spanning a broad range of frequencies from ultraviolet (UV) to the near infrared (NIR) is demonstrated. The perfect plasmonic absorber is achieved by a combination of a metal film with suitable metal/dielectric nanocomposites. Our fabrication technique is simple, versatile, cost-effective, and compatible with c...
متن کاملBroadband Polarization-Independent Perfect Absorber Using a Phase-Change Metamaterial at Visible Frequencies
We report a broadband polarization-independent perfect absorber with wide-angle near unity absorbance in the visible regime. Our structure is composed of an array of thin Au squares separated from a continuous Au film by a phase change material (Ge2Sb2Te5) layer. It shows that the near perfect absorbance is flat and broad over a wide-angle incidence up to 80° for either transverse electric or m...
متن کاملCan silicon carbide serve as a saturable absorber for passive mode-locked fiber lasers?
The study presents a novel demonstration of a passively mode-locked erbium-doped fiber laser (EDFL) that is based on a silicon carbide (SixC1-x) saturable absorber. When the C/Si composition ratio is increased to 1.83, the SixC1-x film transforms from two-photon absorption to nonlinear saturable absorption, and the corresponding value reaches -3.9 × 10(-6) cm/W. The Si-rich SixC1-x film cannot ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 19 21 شماره
صفحات -
تاریخ انتشار 2011