Film Stiffness Analysis for Angular Contact Ball Bearings Considering Thermal Effect
نویسندگان
چکیده
In order to more accurately calculate the film stiffness of angular contact ball bearing, it is necessary to establish the film stiffness calculation model that is consistent with reality. The frictional heat exists in high-speed ball bearings, and can impact on oil film thickness and stiffness. The calculation model of film stiffness of an angular contact ball bearing taking account of the effects of viscous heating was proposed based on the elastohydrodynamic lubrication theory. The central film thickness and film stiffness have been determined. An example was calculated with this derived equation and the result was compared with that given in other literatures. The calculation results show that the central film thickness decreases and the film stiffness increases when friction heating are considered.
منابع مشابه
Dynamic Analysis of a Rotor Supported on Ball Bearings with Waviness and Centralizing Springs and Squeeze Film Dampers
Squeeze film dampers (SFDs) are often used in machines with high rotational speed to reduce non-periodic behavior by creating external damping. There are some structural parameters which are of great importance in designing these systems, such as oil film thickness and inner race mass of SFD. Moreover, there is a crucial parameter associated with manufacturing process, under the title of wavine...
متن کاملComparison of Bearings --- For the Bearing Choosing of High-speed Spindle Design
There are many types of bearings available, each used for different purposes and different conditions. Two major types of bearings are contact bearings and noncontact bearings. By considering the ball material, I separate the contact bearings to steel bearings and ceramic ball bearings. On the other hand, there are bearings that can run without any contact between the sliding surfaces in the be...
متن کاملInternal Loading Distribution in Statically Loaded Ball Bearings Subjected to a Centric Thrust Load: Numerical Aspects
A known iterative computational procedure is used for internal normal ball loads calculation in statically loaded single-row, angular-contact ball bearings, subjected to a known thrust load, which is applied in the inner ring at the geometric bearing center line. Numerical aspects of the iterative procedure are discussed. Numerical examples results for a 218 angular-contact ball bearing have be...
متن کاملOn the future of controllable fluid film bearings
This work gives an overview of the theoretical and experimental achievements of mechatronics applied to fluid film bearings. Compressible and uncompressible fluids are addressed. Rigid and elastic (deformable) bearing profiles are investigated. Hydraulic, pneumatic, magnetic and piezoelectric actuators are used. The ideas of combining control techniques, informatics with hydrodynamic, thermo-hy...
متن کاملThermal Stress Analysis of a Ball Bearing by Finite Element Method
High cutting speeds and feeds are essential requirements of a machine tool structure to accomplish its basic function which is to produce a work piece of the required geometric form with an acceptable surface finish at as high a rate of production as is economically possible. Since bearings in high speed spindle units are the main source of heat generation. Friction in bearings causes an increa...
متن کامل