Robotic Friction Stir Welding using a Standard Industrial Robot

نویسنده

  • Christopher B. Smith
چکیده

In the automotive industry, a barrier to widespread implementation of friction stir welding (FSW) for aluminum joining is the perceived need for high cost, custom capital machinery. The reason for this perception is that the FSW process requires relatively large forces that commonly used automation machinery (e.g. an industrial robot) has difficulty producing. Further complicating the issue, is the need to perform FSW over three-dimensional contours. This further increases the cost of custom capital equipment. Industrial robots would be a preferred solution for performing FSW for a number of reasons, including; their widespread use in the automotive industry, their ability to repeatedly follow three-dimensional paths, and their low costs. For these reasons, a project was initiated to determine the capability of an industrial robot to perform the FSW process. A FSW system was integrated to an ABB robot. Initially, the robot had little success performing FSW, but welds could be made. The implementation of a force control (rather than position control) strategy greatly improved the results. Three dimensional lap welds (2 mm to 2 mm) have been made at travel speeds between 1 and 2 meters per minute. This paper will describe the robotic FSW system. In addition, a case study will be explored that involves dissimilar thickness tailor welded blanks, where at least a five-degree of freedom system is necessary to generate welds. High integrity dissimilar thickness butt welds (1 mm to 2 mm) have been made at travel speeds approaching 2 meters / minute.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A novel friction stir welding robotic platform: welding polymeric materials

The relevance, importance and presence of industrial robots in manufacturing have increased over the years, with applications in diverse new and nontraditional manufacturing processes. This paper presents the complete concept and design of a novel friction stir welding (FSW) robotic platform for welding polymeric materials. It was conceived to have a number of advantages over common FSW machine...

متن کامل

Modelling of friction stir welding for robotic implementation

A three-dimensional numerical model is used to simulate the Friction Stir Welding (FSW) process using the computational fluid dynamics package ‘FLUENT’. Two mechanical models: the Couette and the Visco-Plastic fluid flow models for Al-6061-T6 were simulated. The simulation results are compared to experimental data for Al 6061-T6 welded at high rotational (1500–5000 rpm) and travel speeds rangin...

متن کامل

Process planning for rapid manufacturing of plastic injection mold for short run production

This thesis presents a process planning methodology for a rapid injection mold tool manufacturing system that involves additive and subtractive techniques, whereby slabs are sequentially bonded and milled using layered tool paths. Mold tools are grown in a bottom up fashion, eliminating the need for multi-axis machining operations (beyond three axes) and allowing small features in deep cavities...

متن کامل

Static performance improvement of an industrial robot by means of a cable-driven redundantly actuated system

Every industrial robot has a specific kinematics, which often results in anisotropic performance within its workspace in terms of force and velocity. A cable-driven system can be used to improve the force manipulability of a robot by introducing an actuation redundancy. Such system acts directly on the robot end-effector increasing its flexibility of use in applications where a higher and more ...

متن کامل

Experimental identification of the static model of an industrial robot for the improvement of friction stir welding operations

Friction stir welding (FSW) is a joining process where the regulation of some technological parameters, like machining forces and tool velocities, is essential to ensure the required product quality. Therefore industrial robots are often equipped with force sensors in order to have a monitoring of the interaction forces between the rotating tool and the sheets metal. Alternatively a mathematica...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002