Photon effect on radiative properties of silicon during rapid thermal processing
نویسندگان
چکیده
Emissivity is a critical parameter in the rapid thermal processing ~RTP! of semiconductors for temperature control and thermal modeling. It is often considered as a material property that depends on the sample temperature and surface finishing. For a silicon wafer placed in a radiation environment such as a RTP chamber, however, the ambient photons emitted from lamps create electron-hole pairs in the wafer. These electrons and holes participate in the thermal emission from the wafer and change its radiative properties. This work studies this photon effect on the radiative properties of silicon and demonstrates, through modeling and experiment, that radiative properties of a silicon wafer may depend on the temperature of the lamps due to free-carrier excitation. Such an photon effect imposes a limit on the accuracy of temperature measurement by the infrared pyrometry method in a RTP environment. It is also an important factor to consider in the measurement of the temperature dependence of silicon’s optical properties and in the thermal modeling of the RTP. © 1997 American Institute of Physics. @S0021-8979~97!03014-4#
منابع مشابه
Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths
During the past two decades, there have been tremendous developments in near-field imaging and local probing techniques. Examples are the Scanning Tunneling Microscope (STM), Atomic Force Microscope (AFM), Near-field Scanning Optical Microscope (NSOM), Photon Scanning Tunneling Microscope (PSTM), and Scanning Thermal Microscope (SThM).Results showed that the average reflectance for a dopant con...
متن کاملThe Effect of Surface Roughness on the Radiative Properties of Patterned Silicon Wafers
The radiative properties of patterned silicon wafers have a major impact on the two critical issues in rapid thermal processing (RTP), namely wafer temperature uniformity and wafer temperature measurement. The surface topography variation of the die area caused by patterning and the roughness of the wafer backside can have a significant effect on the radiative properties, but these effects are ...
متن کاملRadiative heat transfer: many-body effects
Heat transfer by electromagnetic radiation is one of the common methods of energy transfer between objects. Using the fluctuation-dissipation theorem, we have studied the effect of particle arrangement in the transmission of radiative heat in many-body systems. In order to show the effect of the structure morphology on the collective properties, the radiative heat transfer is studied and the re...
متن کاملRapid Thermal Processing of Silicon Wafers with Emissivity Patterns
Fabrication of devices and circuits on silicon wafers creates patterns in optical properties, particularly the thermal emissivity and absorptivity, that lead to temperature nonuniformity during rapid thermal processing (RTP) by infrared heating methods. The work reported in this paper compares the effect of emissivity test patterns on wafers heated by two RTP methods: (1) a steadystate furnace ...
متن کاملRadiative Heat Transfer with Quasi Monte Carlo Methods
Monte Carlo simulation is often used to solve radiative transfer problems where complex physical phenomena and geometries must be handled. Slow convergence is a well known disadvantage of this method. In this paper we demonstrate that a significant improvement in computation time can be achieved by using Quasi-Monte Carlo (QMC) methods to simulate Rapid Thermal Processing.
متن کامل