Limitations of Constitutive Relations for TiNi Shape Memory Alloys

نویسندگان

  • W. Tang
  • R. Sandström
چکیده

Phase transformation tensor Q in the constitutive equation pmposed by Tanaka has been evaluated by employing experimental data of TiNi alloys in a constrained recovery process. It demonstrates that the absolute value of Q for the consmined recovery process is typically about 0.6 0.7 x103 MPa, which is much smaller than that for the stress induced martensitic transformation (typically 2.5 3.5 x103). Based on the evaluated results for Q. predicted recovery stress temperature relations by the constitutive equation are compared with the experimental data for TiNi rods under different strains. Big discrepancy exists for large strain conditions. Several transformation kinetic expressions are examined for the constitutive relation of the constrained recovery process.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Deformation Properties of TiNi Shape Memory Alloy

In order to describe the deformation properties due to the martensitic transformation and the R-phase transformation of TiNi shape memory alloy, a thermomechanical constitutive equation considering the volume fractions of induced phases associated with both transformations is developed. The proposed constitutive equation expresses well the properties of the shape memory effect, pseudoelasticity...

متن کامل

Thermomechanical Properties of TiNi Shape Memory Alloy

The thermomechanical properties of shape memory effect and superelasticity due to the martensitic transformation and the R-phase transformation of TiNi shape memory alloy were investigated experimentally. The transformation line, recovery stress and fatigue property due to both transformations were discussed for cyclic deformation. The thermomechanical properties due to the R-phase transformati...

متن کامل

Design and development of novel antibacterial Ti-Ni-Cu shape memory alloys for biomedical application

In the case of medical implants, foreign materials are preferential sites for bacterial adhesion and microbial contamination, which can lead to the development of prosthetic infections. Commercially biomedical TiNi shape memory alloys are the most commonly used materials for permanent implants in contact with bone and dental, and the prevention of infections of TiNi biomedical shape memory allo...

متن کامل

Introduction of antibacterial function into biomedical TiNi shape memory alloy by the addition of element Ag.

A new kind of biomedical shape memory TiNiAg alloy with antibacterial function was successfully developed in the present study by the introduction of pure Ag precipitates into the TiNi matrix phase. The microstructure, mechanical property, corrosion resistance, ion release behavior in simulated body fluid, cytotoxicity and antibacterial properties were systematically investigated. The typical m...

متن کامل

Internal Friction in Fe-Co-Ni-Ti Shape Memory Alloys

The anomalies of the temperature dependences of the logarithmic decrement and eigen frequency of the free damped vibrations for Fe-Co-Ni-Ti shape memory alloys were first found in the vicinity of the reverse ay martensitic transformation. It was shown the damping capacity in the alloys investigated is comparable with that for TiNi based alloys.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016