Low-temperature formation of metal/molecular-beam epitaxy
نویسندگان
چکیده
We report soft x-ray photoemission studies of metal/molecular-beam epitaxy (MBE)GaAs(lOO) interfaces formed at low temperature. Our results indicate that rectifying barrier heights are proportional to the metal work function in accordance with Schottky's original description of metal-semiconductor contacts. These results confirm the predictions of a selfconsistent model of metal-semiconductor interfaces, and suggest that metal-induced gap states and native defect mechanisms are not major factors in determining the Fermi level energy at "ideal" interfaces. We attribute deviations from the ideal Schottky limit behavior observed for interfaces formed at room temperature to metallization-induced atomic relaxations (rather than electronic relaxations) occurring at metal-semiconductor contacts. We present a useful methodology for analyzing electronic properties at metal-semiconductor interfaces. The pronounced differences in barrier height formation between MBE vs melt-grown GaAs can evidence the role of deep states in controlling Schottky barriers at metal/melt-grown GaAs.
منابع مشابه
InAs=InGaP=GaAs heterojunction power Schottky rectifiers
A low-temperature (LT) grown InAs epi-layer has been applied as the gate to the dual-material structure of lattice-matched InGaP on GaAs, to make a high-temperature power rectifier. The LT molecular beam epitaxy technique enables the formation of an abrupt interface between InAs and InGaP. This heterojunction rectifier utilises the strong thermal stability of the InAs=InGaP heterojunction and t...
متن کاملSelf - assembled magnetic nanostructures prepared by molecular beam epitaxy on low energy surfaces
Self-assembled magnetic nanostructures prepared by molecular beam epitaxyon low energy surfacesNanostructures of MxPt1−x (M=Co and Fe) alloys have perpendicular magnetic aniso-tropy which makes them good candidates as high density magnetic recording media. Inthis thesis work, the structural and magnetic properties of these nanostructures werestudied as a function of the ...
متن کاملGrowth mechanism of AlN by metal-organic molecular beam epitaxy
The phenomena that accompany the growth of aluminum nitride (AlN) by metal-organic molecular beam epitaxy with trimethylaluminum and ammonia as sources of aluminum and nitrogen, respectively, have been systematically investigated. Optimizing the growth temperature, flux ratios, and the ammonia injector temperature, we obtained an efficient growth with a rate of 500 nm/h and a low consumption of...
متن کاملFinite Element Simulation of Metal–Semiconductor–Metal Photodetector
LLE Review, Volume 119 154 Introduction Low-temperature–grown GaAs (LT-GaAs), deposited by molecular beam epitaxy, has been known for its ultrashort, subpicosecond photocarrier lifetime and relatively high carrier mobility. Therefore, in recent years LT-GaAs has been the material of choice for the fabrication of photonic devices such as photoconductive switches,1,2 both of the metal–semiconduct...
متن کاملSpectroscopic studies of the visible and infrared luminescence from Er doped GaN
The visible and infrared luminescence of erbium doped gallium nitride prepared by metal-organic molecular beam epitaxy (MOMBE) and solid-source molecular beam epitaxy (SSMBE) were investigated as a function of excitation wavelength and temperature. Both samples exhibited 1.54 mm Er photoluminescence (PL), but only GaN:Er (SSMBE) showed visible PL lines at 537 and 558 nm. Excitation wavelength d...
متن کامل