Tuning for Smooth PID Control with Acceptable Disturbance Rejection
نویسنده
چکیده
The objective of most published tuning rules is “tight” or fast control, subject to avhieving acceptable robustness. This gives a maximum limit on the controller gain. In industrial practice, however, the objective is often “smooth” or slow control, subject to achieving acceptable performance in terms of disturbance rejection. This paper provides the corresponding minimum limit on the controller gain. In terms of appropriately scaled variables, the minimum controller gain is approximately 1, which justifies default settings commonly used in industry.
منابع مشابه
Robust Tuning of PID Controller With Disturbance Rejection Using Bacterial Foraging Based Optimization
In this paper, design approach of PID controller with rejection function against external disturbance in motor control system is proposed using bacterial foraging based optimal algorithm. Up to the present time, PID Controller has been used to operate for AC motor drive because of its implementational advantages in practice and simple structure. However, it is not easy to achieve an optimal PID...
متن کاملSimple Tuning Rules of PID Controllers for Integrator/Dead time Processes
In this paper, simple rules for tuning PID controllers for integrator/dead time processes are proposed. These rules are derived by the optimization of a discrete-time error integral criterion called the switch time weighted summation of squared error (SWSSE) criterion. In this criterion, the first M samples of the transient response are weighted by 1, while the remaining samples until the end o...
متن کاملA Unified IMC based PI/PID Controller Tuning Approach for Time Delay Processes
This paper proposes a new PI/PID controller tuning method within filtered Smith predictor (FSP) configuration in order to deal with various types of time delay processes including stable, unstable and integrating delay dominant and slow dynamic processes. The proposed PI/PID controller is designed based on the IMC principle and is tuned using a new constraint and without requiring any approxima...
متن کاملA Novel Controller Design for the Next Generation Space Electrostatic Accelerometer Based on Disturbance Observation and Rejection
The state-of-the-art accelerometer technology has been widely applied in space missions. The performance of the next generation accelerometer in future geodesic satellites is pushed to 8 × 10 - 13 m / s 2 / H z 1 / 2 , which is close to the hardware fundamental limit. According to the instrument noise budget, the geodesic test mass must be kept in the center of the accelerometer within the boun...
متن کاملImproving the Load Disturbance Rejection Performances of Imc-tuned Pid Controllers
In this paper a new methodology for the improvement of regulation performances of PID controllers, tuned according to the concept of Internal Model Control, is presented. Basically, it consists of adding to the PID output, when no change of the set-point is required, a value that depends on the difference between the system output and the PID output itself. In this way the load disturbance reje...
متن کامل