Solving Depressions Formed during Production of Plastic Molding

نویسنده

  • P. BARON
چکیده

J. Dobránsky, P. Baron, M. Kočiško, Faculty of Manufacturing Technologies with a seat in Prešov, Technical University of Košice, Slovak Republic L. Běhálek, Faculty of Manufacturing Technologies, Technical University of Liberec, Czech Republic E. Vojnová, 1.PN Moulds and Tools, Prešov, Slovak Republic This article deals with improvement of design properties of molded plastic parts. It can be achieved by modifying construction of metal injection mold and optimization of parameters in injection process. The subject of our examination was depressions formed on molded plastic parts which are inacceptable in the process of approval. The problem which has arisen was solved in two phases. The first phase consisted in alteration of injection mold design – enlargement of injection molding gate. In the second phase, we have changed the location of injection molding gate. After performing constructional modifications, new molded plastic parts were manufactured and assessed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimization of Plastic Injection Molding Process by Combination of Artificial Neural Network and Genetic Algorithm

Injection molding is one of the most important and common plastic formation methods. Combination of modeling tools and optimization algorithms can be used in order to determine optimum process conditions for the injection molding of a special part. Because of the complication of the injection molding process and multiplicity of parameters and their interactive effects on one another, analytical...

متن کامل

Experimental Study and Numerical Simulation of Injection Molding Process for Special-Shaped Plastic Part

Taking the special-shaped plastic part as the research object, numeric simulation and experimental study of the injection molding process are completed based on the synthetical application of numeric simulation technology, orthogonal experiment method, Moldflow, injection machine and CMM. Optimal feeding system and molding process parameters are obtained and qualified products are produced. The...

متن کامل

Acoustic Emission Crack Detection at Injection Molding Process

This paper presents the experimental results regarding acoustic emission signals measured during the injection molding of those standard test specimens commonly used for examining the shrinkage behaviour of various thermoplastic materials. In daily industrial production of different plastic products we often have to deal with various errors that practically occur on the mold primarily as a resu...

متن کامل

Micro Plastic Part Fabrication Using Custom Made Vertical Injection Molding Machine

This study focuses on fabrication of a micro plastic part using custom made vertical injection molding machine. Electrical discharge machining (EDM) and micro mechanical machining was used to fabricate micro shape cavity on aluminum mold. The mold was embedded with Polymethyl Methacrylate (PMMA) window to observe the behavior of plastic melt flow during injection. The custom made vertical injec...

متن کامل

Finding efficient frontier of process parameters for plastic injection molding

Product quality for plastic injection molding process is highly related with the settings for its process parameters. Additionally, the product quality is not simply based on a single quality index, but multiple interrelated quality indices. To find the settings for the process parameters such that the multiple quality indices can be simultaneously optimized is becoming a research issue and ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014