Component Sizing Study for a Light-duty Series Hydraulic Hybrid Vehicle in Urban Drive Cycles

نویسندگان

  • Katharina Baer
  • Liselott Ericson
  • Petter Krus
چکیده

With the focus on energy efficiency for many different kinds of vehicle applications, hybridization is considered a possible solution to reduce fuel consumption. While hybrid electric concepts are already available for passenger vehicles, and also considered for heavier applications, hybrid hydraulic alternatives have been mainly limited to the latter, which benefit most from the higher power density available. To study the different hybrid architectures and applications, a modeling framework for the system design is developed using the simulation tool Hopsan from Linköping University. Previously, the model of a series hydraulic hybrid vehicle was introduced, a lightduty vehicle simulated over two standard urban drive cycles, and its potential for further work established. In this paper, the model is extended by including a simple combustion engine power management to provide for more realistic propulsion of the hydraulic drivetrain, showing the potential to operate a series hydraulic hybrid vehicle’s engine in more efficient regions. Additionally, the design is studied concerning the effects of a variation of key component sizes on the accuracy and energy efficiency objectives. Instead of subjecting the system to (multi-objective) optimization, at this stage the individual components’ influence is studied, and the objectives are dealt with separately from each other to eliminate the need for compromise between them to gain a better understanding of the interdependencies.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modelling and Analysis of Plug-in Series-Parallel Hybrid Medium-Duty Vehicles

The paper studies a series-parallel hybrid powertrain configuration for the medium-duty plug-in hybrid trucks and Volt-like passenger cars. The series-parallel hybrid combines the features of the parallel hybrid and the series hybrid. Series-parallel hybrid powertrains with preand post-transmission configuration for the plug-in hybrid medium-duty trucks were modelled and compared with a convent...

متن کامل

Battery and generator sizing of series hybrid electric vehicle based on experimental data and standard cycles simulation

Hybrid electric vehicles are getting more attention due to the fuel consumption and emission issue in megacities. Energy management strategy and battery capacity are the primary factors for the energy efficiency of range-extended hybrid electric vehicles. Iran khodro Powertrain Company has unveiled a series of hybrid electric vehicles and is improving its performance constantly. In the present ...

متن کامل

Development of a Hydro-Mechanical Hydraulic Hybrid Drive Train with Independent Wheel Torque Control for an Urban Passenger Vehicle

This paper presents a hydraulic hybrid vehicle drive train to improve the fuel efficiency of a passenger car. The developed hydro-mechanical drive train enables independent control of the torque at each wheel. The motivation for developing this drive train is a hydraulic hybrid vehicle test bed for the Center for Compact and Efficient Fluid Power at the University of Minnesota. The hydro-mechan...

متن کامل

Modification of Equivalent Consumption Minimization Strategy for a Hybrid Electric Vehicle

Equivalent consumption minimization strategy (ECMS) is one of the main real-time control strategies for hybrid electric vehicles (HEVs). This paper proposes a method to modify this strategy. This modification reduces calculation time of ECMS and therefore, facilitates its application as the real-time controller. Dynamic programming (DP) method is employed to reach this aim. This method is appli...

متن کامل

Antilock Regenerative Braking System Design for a Hybrid Electric Vehicle

Hybrid electric vehicles employ a hydraulic braking system and a regenerative braking system together to provide enhanced braking performance and energy regeneration. In this paper an integrated braking system is proposed for an electric hybrid vehicle that include a hydraulic braking system and a regenerative braking system which is functionally connected to an electric traction motor. In the ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014