UV irradiation induced transformation of TiO2 nanoparticles in water: aggregation and photoreactivity.

نویسندگان

  • Jing Sun
  • Liang-Hong Guo
  • Hui Zhang
  • Lixia Zhao
چکیده

Transformation of nanomaterials in aqueous environment has significant impact on their behavior in engineered application and natural system. In this paper, UV irradiation induced transformation of TiO2 nanoparticles in aqueous solutions was demonstrated, and its effect on the aggregation and photocatalytic reactivity of TiO2 was investigated. UV irradiation of a TiO2 nanoparticle suspension accelerated nanoparticle aggregation that was dependent on the irradiation duration. The aggregation rate increased from <0.001 nm/s before irradiation to 0.027 nm/s after 50 h irradiation, resulting in aggregates with a hydrodynamic diameter of 623 nm. The isoelectric point of the suspension was lowered from 7.0 to 6.4 after irradiation, indicating less positive charges on the surface. ATR-FTIR spectra displayed successive growth of surface hydroxyl groups with UV irradiation which might be responsible for the change of surface charge and aggregation rate. UV irradiation also changed the photocatalytic degradation rate of Rhodamine B by TiO2, which initially increased with irradiation time, then decreased. Based on the photoluminescence decay and photocurrent collection data, the change was attributed to the variation in interparticle charge transfer kinetics. These results highlight the importance of light irradiation on the transformation and reactivity of TiO2 nanomaterials.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Photocatalytic Removal of Pseudomonas Aeruginosa from Water Using Titanium Dioxide Nanoparticles and UV Irradiation

Background: Titanium dioxide (TiO2)-mediated photocatalysis has been found to be an efficient method of water treatment and is capable of degrading a wide range of organic pollutants and microbial agents with high efficiency. The microorganism Pseudomonas aeruginosa is resistant to chemicals and UV irradiation. Bacteria which are resistant to UV-induced oxidative damage of the cell membrane are...

متن کامل

Photocatalytic Antibacterial Effects Are Maintained on Resin-Based TiO2 Nanocomposites after Cessation of UV Irradiation

Photocatalysis induced by TiO2 and UV light constitutes a decontamination and antibacterial strategy utilized in many applications including self-cleaning environmental surfaces, water and air treatment. The present work reveals that antibacterial effects induced by photocatalysis can be maintained even after the cessation of UV irradiation. We show that resin-based composites containing 20% Ti...

متن کامل

Fabrication Fe3O4/SiO2/TiO2 Nanocomposites and Degradation of Rhodamine B Dyes under UV Light Irradiation

Recycling and reusing of catalyst is an important factor to produce capable and low cast catalysts. Silica coated magnetic nanoparticles (Fe3O4/SiO2) were synthesized via a simple sol-gel method with the aid of sonication. Fe3O4 nanoparticles. After that a layer of TiO2 was constricted by hydrolyze and condensation of Teteranormalbuthyltitanate to produce Fe3O4/SiO2/TiO2 nanocompsite. As-synthe...

متن کامل

UV-responsive nano-sponge for oil absorption and desorption

Controlled surface wettability for oil has been intensively studied to remove industrial oil waste or oil spill pollution from seas or rivers. In particular, external stimuli-induced special wetting materials, such as photo-responsive TiO2, have attracted considerable attention for oil-water separation. In this study, a novel method is reported to fabricate a nano-sponge which is composed of hy...

متن کامل

Solar light induced photocatalytic degradation of Reactive Blue 220 (RB-220) dye with highly efficient Ag@TiO2 core–shell nanoparticles: A comparison with UV photocatalysis

Ag core–TiO2 shell (Ag@TiO2) structured nanoparticles with Ag to TiO2 molar ratio of 1:1.7 were synthesized using one pot synthesis method and post calcination was carried out at 450 C for 3 h to convert it from amorphous to crystalline form. The Ag core and TiO2 shell formation was confirmed by TEM and AFM. The particle size analysis revealed the average size of Ag@TiO2 as approximately around...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Environmental science & technology

دوره 48 20  شماره 

صفحات  -

تاریخ انتشار 2014